Symbo xBot 5, User Manual, Page: 71 / 84

PRODUCT OPERATION
8
Charging by docking station
Place docking station against the wall and remove any obstacles about
1 meter on each side and 2 meters in front of the station (as shown in
the image).
Press “HOME” button on remote control or on the robot to navigate him
to docking station automatically. Or put the robot to docking station
manually; be sure to place him on charging contacts properly.
Notes:
• The robot must be switched on to start charging.
• When the robot is charging, LED panel will gradually show “1111” from left to right.
• When charging is over, LED panel will show “FULL”.
• In stand-by status, the robot will broadcast voice “Please Charge” when battery capacity is low.
• While working, the robot will be looking for docking station automatically when battery capacity is low.
Tips to Extend Battery Life
• Please, charge the robot up to 12 hours (overnight) for the first time.
• Charge the robot as soon as possible when the battery capacity is low.
• When you will not use the robot for longer time, please fully charge the batter, switch off the robot and keep it
in a cool and dry place.
• If the robot has been put aside over 3 months, please charge the robot for 12 hours before using.
1.
Battery Charging
Charging by adapter
Connect one end of the adapter to the robot and the other end plug
into the power socket (as shown in the image).
2.
The robot can be charged automatically by docking station or manually by adapter.
www.symbo.eu