INSTALLATION INSTRUCTIONS
SYMBIOTE.COM
SYMBIOTE.COM
sheet 2 of 2
p/n 03120306 rev C
STORAGE AND DISPLAY
Storage Cabinet Assemblies
5
6
7
8
Slide the back panel up between the end panels and
fasten with two #10-12x3/8" Phillips pan head screws
to the top panel.
Place the shelf inside the cabinet with the rectangu-
lar lock cut-outs at the front. Install two #10-12x3/8"
Phillips pan head screws through the flange at the
bottom of each end panel to secure the shelf.
Fasten the back panel to the shelf by installing a
#10-12x3/8" Phillips pan head screw on the bottom in
each corner, and a #8-18x1/2" Phillips pan head self-
drilling screw in the center back panel hole.
Pull the sliding hinge brackets toward the lock on the
door assembly. Place door on top of cabinet and align
hinge bracket slots/holes with the threaded inserts
in the bottom flange of the top panel. Fasten door to
top with eight #8-32x1/2" Phillips truss head screws
using a
#2 Phillips screwdriver/bit with driver
.
#10-12x3/8" screw
#10-12x3/8" screw
#10-12x3/8" screw
#8-32x1/2" screw
#8-18x1/2" screw