Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 772 / 861

771 Field descriptions
Cluster field descriptions
Associated tasks
The task that you can perform with this tab is:
■
“Configuring ping groups for clusters” on page 517
.
Ping Groups Properties—IP Addresses tab
Use the IP Addresses tab to add, modify, or delete the IP Address of the host you want to monitor.
Associated tasks
The task that you can perform with this tab is:
■
“Configuring ping groups for clusters” on page 517
.
Ping Groups Properties—Description tab
Optionally, provides an extended description. This information is useful to help track changes or it can
be used as criteria for searches.
The maximum length is 20,000 alphanumeric characters.
NIC Monitoring window
You can monitor the status of each network interface by configuring NIC monitoring. NIC monitoring
does not work on VLAN interfaces.
Associated tasks
The task that you can perform with this window is:
■
“Configuring NIC monitoring on a cluster” on page 517
Table D-261
Ping Groups Properties—General tab
Field Description
Enable Indicates whether this option is enabled.
This option is enabled by default.
Caption An optional, brief description of the ping group.
The maximum length is 128 characters.
For longer descriptions, use the Description tab.
Frequency Frequency (in seconds) of ping attempts.
The default is five seconds.
Retries Time interval (in seconds) before a retry is attempted.
The default is five seconds.
Timeout Timeout value (in seconds).
The default is five seconds.
Table D-262
Ping Groups Properties–IP Addresses tab
Field Description
Address value Lists the IP addresses for the ping group. You can manage this list by adding, modifying, or
deleting entries.