Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual

Page: 604 / 861

603 Field descriptions
Policy field descriptions
Time Period Range Properties—Time Range tab
Use the Time Range tab to specify the time limits that are enforced when the time period is included in
a rule or notification.
Associated tasks
The task that you can perform with this tab is:
■
“Configuring a time period range” on page 287
Table D-37
Time Period Range Properties—Time Range tab
Field Description
Time zone Time zone used in the time period range.
The default is the local time zone of the security gateway.
Time Range/Enable time
range Indicates whether the specification of a time range is enabled.
This option is unchecked by default.
Time Range/From Beginning time of the time range in hours, minutes, and seconds, and whether the
time is AM or PM.
The default is 12:00:00 AM.
Time Range/Through Ending time of the time range in hours, minutes, and seconds, and whether the time
is AM or PM.
The default is 12:00:00 AM.
Day range/From Day of the week on which the time period range begins.
The default, Not Defined, means that this time period range does not use a day
range.
Day range/Through Day of the week on which the time period range ends.
The default, Not defined, means that this time period range does not use a day range.
Date Range/From Date that ends the time period range:
■
Month
From the drop-down list, select a month.
The default, Not Defined, means that no date range has been defined.
■
Day
Use the up and down arrows to select a day, or type an integer between 1 and 31.
The default, 0, is only applicable if the Month is Not defined.
■
Year
Use the up and down arrows to select a Year, or type an integer.
The default, 0, is only applicable if the Month is Not defined.
Date Range/Through Date that ends the time period range:
■
Month
From the drop-down list, select a month.
The default, Not Defined, means that no date range has been defined.
■
Day
Use the up and down arrows to select a day, or type an integer between 1 and 31.
The default, 0, is only applicable if the Month is Not defined.
■
Year
Use the up and down arrows to select a Year, or type an integer.
The default, 0, is only applicable if the Month is Not defined.