Symantec netbackup 5030, Troubleshooting Manual, Page: 39 / 69

Table 5-4
Appliance 1Gb connector LED indications (continued)
Description State LED location
10-Mbps connection (if left LED is on or
blinks) Off 2
100-Mbps connection Solid amber
1000-Mbps connection Solid green
About the LEDs on the appliance FC HBA
The NetBackup Appliance uses 8Gb FC HBA cards to provide FC ports for backups.
Examples of the FC connectors that are used on the FC HBA cards are shown in
Figure 5-4 . Each FC port has an amber, green, and yellow LED. The LEDs are labeled
2, 4, and 8 to indicate the speed of transmission in Gb that the connection supports.
Table 5-5 provides additional information about how the LEDs are used.
Figure 5-4 FC HBA ports with LEDs
Table 5-5 FC HBA LED indications
Description 2/Amber 4/Green 8/Yellow
Power is off. Off Off Off
Data is transferred at a rate of 2
Gbit/s. On/flashes Off Off
Data is transferred at a rate of 4
Gbit/s. Off On/flashes Off
Data is transferred at a rate of 8
Gbit/s. Off Off On/flashes
Power is on (before firmware
initialization). On On On
39 Understanding the LED status indicators
About the LEDs on the appliance FC HBA