About replacing hardware
If hardware needs to be replaced, please contact Technical Support for assistance.
About hot-swappable, customer-replaceable units
(CRUs)
The following components can be removed and replaced.
■
Four SAS externally accessible disk drives
You can remove one faulty disk drive while the appliance is turned on. Place
a disk drive blank into the empty slot to prevent overheating. If more than one
disk drive requires removal, contact Technical Support.
■
Two power supplies
One power supply must be turned on and functioning at all times. You can
remove one of the two power supplies if needed. It is recommended to replace
a faulty power supply as quickly as possible. If there is only one functioning
power supply in the appliance, there is a risk if that power supply is also faulty.
If both power supplies are faulty, turn off the appliance immediately. If you
do not turn off the appliance, overheating of internal components is likely.
Warning:
Customers must not replace any other components. Doing so will void
the warranty.
Removing and replacing components
About replacing hardware
44
