Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0, Manual

Page: 25 / 47

Table 4-1
DTK tasks for Dell servers (continued)
Description Task
You can set the asset tag, network cards, BMC IP, LCD
text, and enable or disable the power button.
See “Configure BIOS - Simple task type” on page 31.
Configure Dell Server BIOS -
Simple
You can view and change all of the DRAC configuration
settings for a server.
See “Configure DRAC - Advanced task type” on page 32.
Configure Dell Server DRAC -
Advanced
You can set the IP address for the management port
and choose what DRAC commands run after the
configuration is finished.
See “Configure DRAC - Simple task type” on page 32.
Configure Dell Server DRAC -
Simple
You can view all of the drives, controllers, and disks
on your server and then configure any of those drives.
See “Configure RAID - Advanced task type” on page 33.
Configure Dell Server RAID -
Advanced
You can use a drag-and-drop tool to define multiple
RAID configurations.
See “Defining rules for RAID configurations”
on page 34.
Configure Dell Server RAID with
Rules
About Lifecycle Controller tasks for Dell servers
Deployment Solution for Dell provides several predefined task types under the
Lifecycle Controller folder. These tasks are mainly used for scripted OS
installations without using PXE.
See “Performing a scripted OS installation without PXE” on page 37.
If you create a job using these tasks, ensure that you create a server job and not
a client job.
See “About deployment tasks and jobs for Dell servers” on page 23.
25 Creating tasks and jobs on Dell servers
About Lifecycle Controller tasks for Dell servers