-6-
2.Arming Motors
Method 1:
3.Disarming Motors
Method 1:
Method 2:
B
Method 3:
1. If the drone flies out of control range, the drone indicator lights will
start flashing slowly and after the drone will slowly descend.
2. If the transmitter turns off or the transmitter battery runs low, the
drone will slowly descend. Turn on the transmitter again, re-pair the
unit and continue to fly.
Step 3: Turn on the drone
Step 4: Move the left stick (throttle) fully up and after
fully down. The drone indicator lights will turn
solid (glow) indicating the drone is ready to
fly.
Push both sticks at the same time
(left stick to the bottom-right corner
and the right stick to the bottom-left
corner) and hold for 1 second and the
motors will start spinning.
Place the drone on a flat level surface
and after press the B button. The
drone will take-off, and hover at the
preset height.
Push the left stick (throttle) fully down
and hold it there for 2-3 seconds and
the motors will stop spinning.
Move the left stick (throttle) fully up,
after let it come back to the middle
and the motors will start spinning.
