SYMA X12 gyroscope explorers Instruction Manual Download Page 8

-7-

BATTERY CHARGING

Battery charging 

Take out the USB charging wire, connect one end to the quad copter, then insert 

the USB port of the USB charging wire to the USB port of the computer (or the 

USB port of the power adapter) to charge the battery.During the time of charging, 

the red indicator of the USB will be OFF.

When it is fully charged, the red indicator will be ON.

Caution:

1.When using the computer for charging, 

  please remember to pull out the 

  charging line before shutting down 

   the computer.

2.Please pay attention to aim correctly 

   to the correct polarity when connecting 

  the USB wire with the battery.Please make 

  sure the polarityshould not be upside down.

Charging time: about 50 minutes  ;Flying time: about 4 minutes

CAUTIONS WHEN CHARGING 

 1.When charging,please put this product on the dried or ventilated area and 

    keep it far away from heat source or explosive product.

 2.When charging, please remove the batteries from the quad copter.All the 

   charging process should be under the guidance of the adult so as not to 

   cause accident.

 3.When finish flying, please do not charge the battery which surface 

    temperature is still not cooled down.Otherwise it may cause swollen battery 

    or even cause fire disaster.

 4.During the process of battery charging, falling down or striking by the outer

    force should be avoided.Otherwise it may cause short-circuited within the 

    battery and thus may cause danger.

 5.In order to make sure safety, please make sure that you need to use the 

   original USB charging wire that made from our factory. When the battery is 

   used for a long time or appears aging or swollen,please replace them timely.

 6.When the batteries are fully charged, if you do not remove it from the charger 

    for a long time, the battery may discharge automatically, which may cause 

    battery exhaustion. When the battery voltage that the charger has tested is 

    lower than the rated voltage, the charger will re-charge the battery until it is 

    fully charged. Charging or discharging too often or repeated charging or 

    discharging may reduce the using life of the batteries.

Summary of Contents for X12 gyroscope explorers












Reviews: