14
Push the M button. The hour display stops blinking and the minute display start blinking. Push the S
button to adjust the tens place in the minute display.
Push the M button. The tens place stops blinking and the units display starts blinking. Push the S button
to adjust the units place in the minute display.
Push M button to finish clock setting.
Trip computer
This function screen displays four items of the trip computer.
Average vehicle speed:
The average vehicle speed is calculated by the total travelled distance and
travelled time since the last average vehicle speed reset. The average vehicle speed is reset
automatically when the ignition switch is turned off over 30 minutes. This item only displays in km/h.
Travelled distance:
The travelled distance is the total driving distance since the last travelled distance
reset. The travelled distance is reset automatically when the ignition switch is turned off over 30 minutes.
This item only displays in km. Display range: 0~999.9 km. This travelled distance also resets
automatically when the values reach the maximum limit 999.9.
Travelled time:
The travelled time is the total driving distance since the last travelled time reset. The
travelled time is reset automatically when the ignition switch is turned off over 30 minutes.
Max RPM:
This function records the maximum engine revolution of this scooter since the last max rpm
reset. The max rpm is reset automatically when the ignition switch is turned off over 30 minutes.
Vehicle information
This function screen displays two items of the vehicle information.
Battery voltage gauge:
This gauge shows current battery voltage. The values synchronize with the
multi-function meter
’s battery voltage gauge (page 17). Display range: 8.0~16.0V.
NOTE :
When the battery is disconnected, the clock is reset to 12:00 AM and starts working again when the
battery is reconnected.
If the clock is idled about 30 seconds while setting, it will exit setting mode automatically and starts
working again.
If the ignition switch is turned off while setting the clock, the clock will exit setting mode when the
ignition switch is turned on again.
The clock works normally by the backup power even the ignition switch is turned off.
A.
Clock
B.
Average vehicle speed
C.
Travelled distance
D.
Travelled time
E.
Max RPM (maximum engine revolution)
○
A
○
B
○
C
○
D
○
E
