27
10. Inspection and maintenance before riding
COOLING SYSTEM INSPECTION
(Checking coolant lever)
1. Support vehicle with main stand on a level ground.
2. Check reserved tank from viewing window to see if coolant level is between the upper limit and lower limit
mark.
3. Add coolant up to upper mark if coolant is close to the lower mark.
(Check the cooling system for leakage)
Check radiator and piping for leakage.
Check the ground where the vehicle is parked for water dripped from the vehicle.
REPLENISHMENT OF COOLANT
Always keep radiator cap tightly closed.
1. Support vehicle on a level ground in a straight
up position.
2. Open the battery cabinet door.
3. Open surge tank cap, refill coolant until reaches
the upper mark.
If coolant level becomes too low and occurs too
often, it may indicate there is something wrong
with the coolant system.
To avoid radiator getting rusty, do not use
coolants other than those recommended.
Coolant recommended: SYM Bramax radiator
agent Concentration: 50%
Radiator capacity: Main radiator :1,750 cc.
Surge tank : 350 cc.
CAUTION:
The replacement of engine coolant should be carried out by authorized SYM dealer's mechanic.
Customer is not allowed to replace the engine coolant by himself.