Sylvania SYLVANIA SCR4975, Manual

Page: 5 / 14

Unravel the AC cord and connect it to a conveniently
located AC outlet having 120V and 60Hz only. The Clock
Display will illuminate and "12:00" will appear in the window.
NOTE: If the AC plug does not fit into a nonpolarized outlet,
do not file or cut the wide blade. it is the user's responsibility
to have an electrician replace the obsolete outlet.
If the AC cord is disconnected or if there is a power failure, this electronic clock is
designed to continue operating internally (without showing the time on the Clock Display)
with a
3 volt battery (not included). To install the battery, press and lift open the
compartment cover. Connect the battery to the terminals of the battery snap inside the
compartment (use of an alkaline battery is recommended) and snap the battery
compartment cover back into place.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1.Use only the size and type of battery specified.
2.Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent
damage or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can overheat and
rupture. (Follow battery manufacturer's directions.)