INSTALLATION INSTRUCTIONS
10
Installation in a double-hung sash
windows
1. Cut the foam seal(adhesive type) to the proper length and
length of the window slider kit according to the width of
window,
Open the window sash and place the window slider kit on
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window. Show as in Fig.12
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and sealing the
open gap between the top window sash and outer window
sash. Show as in Fig.13.
Foam seal A
(adhesive type)
Foam seal
Fig.10
Fig.11
Fig.12
Fig.13
Window kit
Window kit
attach it to the window sill. Fig.10
2. Attach the window slider kit to the window sill. Adjust the
the window sill. Fig.11
Window sill
Window sill
22.1" ~ 38.6"
shorten and adjust the window kit if the width of
window is less than 27 inches.
