17
Installing the Hard Drive
3.
Connect the Hard Drive into the Cartridge Casing
.
• Take the Hard Disk Drive and Connect the two cables from the back of the Cartridge Casing to the Hard
Drive.
• The cables should be pushed in firmly, but not forcibly.
• The 4 Pin connection is the DC Power cable, and the wider cable is the standard Hard Drive IDE type
connection.
4. Secure the Hard Drive in the Casing (optional)
• Use screws and tighten them, positioning the Hard Drive into place. This step is optional, but it is
recommended.
5. Slide the top Cover over the Cartridge Casing
• Slide the Cover forward over the
Cartridge Case. Ensure it is secured in
place over the release latch.
Cable Connection
Position Hard Drive
and secure with pro-
vided screws
Cover
Hard Drive posi-