24
▼
Reviewing Caller ID Numbers
Your phone stores the most recent 30 numbers in Caller ID memory. If the
memory is full, a new call replaces the oldest number. To review your Caller
ID numbers, follow the steps below.
1) Press
CID/MENU
, and the Caller ID
summary screen appears. The screen shows
the number of new callers and the total
number of callers stored in Caller ID memory.
2) Press
/VOL
to scan through the list. The
most recent call appears first with the date,
time, call count, name, and phone number.
Press
/VOL
to scan back through the list.
3) Press
END
to return to standby.
NOTE:
The number of calls from the same Caller ID appears next to the
received time.
Once you read the new message, the number will disappear.
▼
Calling a Caller ID Number
1) Press
CID/MENU
, and the Caller ID
summary screen appears. The screen shows
the number of new callers and the total
number of callers stored in Caller ID memory.
2) Select the number that you would like to
dial. Press
/VOL
to scan forward and
/VOL
to scan back through the list.
NOTE:
For long distance dialing, press
1
to add a “
1-
” to the number on the
display. Press
1
again to remove the “
1-
” from the display.
Pressing
3
will set or cancel an area code setting.
3) Press
TALK/FLASH
and the number automatically dials.
NOTE:
You cannot make a call from the Caller ID list if your ST88245 is
connected to a private branch exchange (PBX).
You can place a call from Talk Mode. Press the
TALK/FLASH
key, then
press the
CID/MENU
key. Select the phone number that you want to dial by
pressing the
/VOL
or
/VOL
key. Press the
SELECT
key.
The displayed phone number will be dialed.
C a l l e r I D
N e w : 0 1
T o t a l : 0 2
C a l l e r I D
N e w : 0 1
T o t a l : 0 2
UP044DH (ST88245) OM resize 3/4/04 3:05 PM Page 24