Note:
●
In the above steps, the picture adjustment display will disappear from the TV screen automati-
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)
▲
button so that “PICTURE” is selected. Then press the CH(annel)
▲
or
▼
button repeatedly
until the display returns to the screen.
[USING THE GAME BUTTON]
You can set Game mode and front AUDIO/VIDEO input mode at the same time by pressing the
GAME button on the remote control. “GAME” appears on the TV screen.
●
To exit Game mode and front A/V input, press the INPUT SELECT button.
●
To cancel the Game mode only, follow the steps in PICTURE ADJUSTMENT. Game mode will
be set to [OFF] automatically and “VIDEO2” (front AUDIO/VIDEO input mode) instead of
“GAME” appears on the TV screen.
●
If you press the GAME button when the TV is off, the TV turns on and will be in Game mode
and will select front A/V input automatically.
OPERATIONS
MANUAL
NEWS
SPORT
MOVIE GAME
PICTURE ADJUSTMENT
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
1) Connect the power cord to a standard AC outlet.
Note:
If some digits appear in the corner of the screen, press the POWER
button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel)
▲
or
▼
button to point to “[ENGLISH]”.
5) Select “ENGLISH” or “ESPAÑOL” = Spanish by using
the VOL(ume)
▲
or
▼
button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel)
▲
or
▼
button to point to “CHANNEL SET”, then
press the VOL(ume)
▲
button.
4) Press the CH(annel)
▲
or
▼
button to point to “AUTO PRESET CH”,
then press the VOL(ume)
▲
button.
The tuner scans and memorizes all active channels in your area.
●
The TV distinguishes between standard TV channels and cable (CATV)
channels.
●
When AUTO PRESET CH action is completed, the lowest memorized
channel reappears on the screen.
●
When you press the CH(annel)
▲
or
▼
button after selecting “AUTO
PRESET CH”, the tuner will stop at the memorized channels only.
●
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try AUTO PRESET CH action again when reception conditions are better.
●
When AUTO PRESET CH is activated where there is no TV signal input, “NO TV SIGNALS”
will appear on the display after the completion of channel scanning.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel)
▲
or
▼
button to point to “CHANNEL SET”, then
press the VOL(ume)
▲
button.
3) Press the VOL(ume)
▲
button so that “ADD/DELETE” is selected.
4) Use the CH(annel)
▲
or
▼
button to select the channel you wish to put
into memory or to erase from memory.
Note:
The display will disappear automatically in about 10 seconds.
Perform “ADD/DELETE” function while this display appears on the
screen.
●
Press the VOL(ume)
▲
or
▼
button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
●
Press the VOL(ume)
▲
or
▼
button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) System
You can listen to a program in MTS stereo by following the steps below.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
Type of
broadcast
Regular
-None-
Stereo
broadcast
STEREO
SAP
Menu
Selection
MAIN
MONO
SAP
-None-
-None-
MONO
STEREO
SAP
MAIN
MAIN
PREPARATION FOR USE
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel)
▲
or
▼
button.
3) Adjust the volume to the desired listening level using the VOL(ume)
▲
or
▼
button.
4) Adjust picture controls for a natural looking image. (See PICTURE ADJUSTMENT.)
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn
off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be
set up to 90 minutes. Each time the SLEEP button is
pressed, the time ncreases by 10 minutes. (The timer dis-
play counts up and sleep timer will be displayed on the
screen when you press the SLEEP button on remote con-
trol.)
Note:
When you disconnect the unit from the AC outlet or when you have a power failure,
the sleep time will be lost.
CLOSED CAPTION SELECTION
SLEEP 10
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until “SLEEP 0” is displayed.
You may view specially labeled (cc) TV pro-
grams, movies, news and prerecorded tapes,
etc. with either a dialogue caption or text dis-
play added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel)
▲
or
▼
button to point
to “CAPTION”.
3) Press the VOL(ume)
▲
or
▼
button to select
the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ C1]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ T1]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ T2]
TV SOUND [MAIN]
: Press the VOL(ume)
▲
or
▼
button.
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
AUTO PRESET CH
ADD/DELETE
AUTO PRESET CH
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel)
▲
or
▼
button to point to “TV SOUND”.
3) Press the VOL(ume)
▲
or
▼
button to select your desired stereo mode.
([MAIN], [MONO] or [SAP].)
AV MEMORY
This feature allows you to expand your viewing experience select MANUAL, SPORT, NEWS,
MOVIE and GAME to match the program you are watching.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume)
▲
button so that “PICTURE” is selected.
3) Select the item with the CH(annel)
▲
or
▼
button.
Note:
See PICTURE ADJUSTMENT to manually customize the picture.
To show the status, press the
DISPLAY button on the remote
control.
SAP:
Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ C1]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ T1]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [ T2]
TV SOUND [MAIN]
Type of
broadcast
Regular
-None-
Stereo
broadcast
STEREO
SAP
Menu
Selection
MAIN
MONO
SAP
-None-
-None-
MONO
STEREO
SAP
MAIN
MAIN
Type of
broadcast
Regular
-None-
Stereo
broadcast
STEREO
SAP
Menu
Selection
MAIN
MONO
SAP
-None-
-None-
MONO
STEREO
SAP
MAIN
MAIN
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MONO]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]
: Press the VOL(ume)
▲
or
▼
button.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
to increase
brightness
to increase
contrast
to brilliant
to green
to clear
to decrease
brightness
to decrease
contrast
to pale
to purple
to soft
VOL(ume)
VOL(ume)
[-]
SHARPNESS
[+]
[-]
CONTRAST
[+]
[-]
COLOR
[+]
[-]
TINT
[+]
[-]
BRIGHT
[+]
1) Press the MENU button so that the menu dis-
play appears on the TV screen.
2) Press the VOL(ume)
▲
button so that “PIC-
TURE” is selected.
3) Press the CH(annel)
▲
or
▼
button to select
“MANUAL”, then press the VOL(ume)
▲
but-
ton.
4) Select the feature you wish to adjust with the
CH(annel)
▲
or
▼
button and adjust it with the
VOL(ume)
▲
or
▼
button.
: Press the CH(annel)
▲
or
▼
button.
: Press the CH(annel)
▲
or
▼
button.
V-CHIP SET UP
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except for news and sports programs, unedited
movies on premium cable channels and Emergency Broadcast System signals), then denies access
to programming if the program's rating meets or exceeds the limitations you select. In this case,
“PROTECTED PROGRAM by ...” message appears on the TV screen.
To block certain ratings, follow the steps below.
