2
PARTS LIST
Mounting bracket .............................................................................................................. 1
Screws ................................................................................................................................. 4
Wall Anchor ........................................................................................................................ 4
INSTALLATION
tools required:
• Electric drill
• Phillips (cross-head) screwdriver
• Tape measure
choose a suitable location for mounting the convector:
A. the location shall have enough space and clearance as illustrated in Fig. 1.
B. the power outlet shall be accessible by the electrical cord of this convector
without using an extension cord.
c. the power outlet shall not be located directly behind or above the convector.
WALL MOUNTING INSTRUCTIONS
1. release the mounting bracket by pressing the locking brackets on both sides.
2. Use the mounting bracket as a template by holding it against the wall as
illustrated in Fig. 1.
3. Follow the dimensions specified in Fig 1 and place mounting bracket in the
desired location.
4. Mark the 4 screw holes. Place mounting bracket on the screw markings and
ensure the mounting bracket is perfectly level.
5. Predrill holes and insert 4 wall anchors. Wall anchors are needed for
mounting on drywall or concrete walls. Ensure you use the proper anchors
for your wall type.
6. Replace the mounting bracket and fasten it with screws (minimum 4 screws).
7. Mount the convector to the mounting bracket and engage the 2 locking
brackets at the top. See Fig. 2.
caUtion – high temPeratUre, risk of fire. keeP eLectricaL
cords, draPery, fUrnishings and other combUstibLes at Least
3 ft (0.9 m) away from the front of the heater and away from
the side and of heater.
warning – to redUce risk of fire, do not store or Use
gasoLine or other fLammabLe vaPors and LiQUids in the
vicinity of the heater.
Fig. 2
Wall
Wall bracket
Convector
OPERATION
turn the “0/I” switch on the right side of the convector to “I” position. the indicator
light and display will be ON.
1.
time setting
– Press MODE button and press UP and DOWN buttons at the
same time.
A. Press the UP or DOWN button to set the ‘DAY’ from MONDAY (MO) –
TUESDAY (TU) – WEDNESDAY (WE) – THURSDAY (TH) – FRIDAY (FR) –
SATURDAY (SA) – SUNDAY (SU).
B. Press MODE button again. The display ‘HOUR’ will flash and then press
the UP or DOWN button to set the ‘HOUR’.
C. Press MODE button again. The display ‘MINUTE’ will flash and then press
the UP or DOWN button again to set the ‘MINUTE’.
D. Press MODE button again to exit and save the setting.
Fig. 1
WIDTH OF CONVECTOR
15.3 cm
(6 in)
15.3 cm
(6 in)
Minimum
clearance to
adjacent
surface
15.3 cm
(6 in)
Minimum
clearance to
adjacent
surface
Minimum
distance
to ground
58.1 cm
(22.9 in)
33.7 cm
(13.3 in)
9.8 cm
(3.9 in)
14.6 cm
(5.75 in)
22.2 cm
(8.75 in)
22.2 cm
(8.75 in)