Sylvania SRCD844, Instruction Manual

Page: 16 / 65

1.Select FM or AM using the FM/AM button.
2.Tune to the desired frequency.
Turn around the unit to find the best position for AM stations.
Extend and turn around the FM antenna so that you can receive the station clearly.
If the reception is poor
AM broadcast
FM broadcast
16
TUNING
DN
UP
LISTENING TO THE RADIO
AUX OPERATION
AM/FM
Press the AUX/BT button repeatedly to switch to AUX mode to listen through external audio player connected
through the LINE IN/AUX IN jacks.
NOTE: During LINE IN playing, please do not plug in AUX IN jack, or the LINE IN playing will be cut off.
LINE IN:
1. Plug one end of RCA cable(R/L) to the AUX OUT/LINE OUT jacks (R/L) of the external audio player(eg: DVD player).
2. Plug the other end of RCA cable (R/L) to the LINE IN jacks(R/L)on the rear side of the unit.
AUX IN:
1. Plug one end of 3.5mm audio cable to the AUX OUT/LINE OUT jacks of the external audio player(eg: Phone).
2. Plug the other end of 3.5mm audio cable to the AUX IN jacks on the front side of the unit.
NOTE: During LINE IN playing, please do not plug in AUX IN jack, or the LINE IN playing will be cut off.