Sylvania SRCD838, Instruction Manual

Page: 18 / 42

No power
No sound.
CD Player
Troubleshooting
17
knob clockwise.
Noisy sound:
Radio:
Tune the station properly.
Turntable:
Not playing or sound distortion
The Function selector is in wrong position, turn it to PHONE position.
Not playing
The Function selector is in wrong position, turn it to CD position.
Load the disc with the label side face up.
Try again wth another disc.
Not playing
The Function selector is in wrong position, turn it to
TAPE/AUX position.
Rising the volume level by turn the Power ON/OFF
- VOLUME
RADIO position.
The Function selector is in wrong position, turn it to
Relocation the unit.
Loosen the screw, and take out the stylus guard.
(The stylus guard is a white plastic cover that protects the
stylus during transportation.)
Select the correct playback speed.
The unit is too close to a TV set or similar appliances.
Relocate the unit.
If the disc is dirty, clean the surface of the disc.
The tape has not insert completely. Insert the tape tightly until
the Eject button is ejected.
If the unit is halt or abnormal operation, unplug the power cord
from the wall outlet and plug it again.
If the unit is halt or abnormal operation, unplug the power cord
from the wall outlet and plug it again.
Clean and demagnetize the heads.
Check the connection of AC wall outlet.
Can not listen to any station, or signal is too weak.
Sound is distorted or noisy.
If you experience any problems with the unit, please take a
monent to look through this chart and see if you can solve the
problem yourself before you call your dealer.
Always keep the turntable clean.
If the surface of the unit gets dirty, wipe with a soft cloth or
use a diluted mild liquid soap. Be sure to remove any excess
liquid completely. Do not use thinner, benzine or alcohol as
they may damage the surface of the unit. Allow the surface
of the unit to dry completely before using.
Maintenance:
Cassette Tape Player