Sylvania SRCD286 Instructions Manual Download Page 2

13.

 

Unplug this apparatus during lightning storms or when unused for long periods of time. 

14.

 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 

moisture, does not operate normally, or has been dropped. 

15.

 

Grounding or Polarization – This product may be equipped with a polarized alternating-current 

line plug (a plug having one blade wider than the other). This plug will fit into the power outlet 

only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try 

reversing the plug. If the plug should still fail to fit, contact your electrician to replace your 

obsolete outlet. Do not defeat the safety purpose of the polarized plug. 

16.

 

Alternate Warnings – This product is equipped with a three-wire ground-type plug, a plug 

having a third (grounding) pin. This plug will only into a grounding-type power outlet. This is a 

safety feature. If you are unable to insert the plug into the outlet, contact your electrician to 

replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.   

17.

 

Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure 

reliable operation of the product and to protect it from overheating, and these openings must 

not be blocked or covered. The openings should never be blocked by placing the product on a 

bed, sofa, rug, or other similar surface. This product should not be placed in a built-in 

installation such as a bookcase or rack unless proper ventilation is provided or the 

manufacturer’s instructions have been adhered to. 

18.

 

The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect 

device shall remain readily operable. 

19.

 

: CLASS II apparatus with double insulation, and no protective earth provided. 

20.

 

Caution Marking and rating plate was located at bottom enclosure of the apparatus. 

21.

 

WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or 
moisture. 

22.

 

The apparatus shall not be exposed to dripping or splashing and that no objects filled with 
liquids, such as vases, shall be placed on apparatus. 

23.

 

The mains plug is used as disconnect device.The mains plug of apparatus should not be 
obstructed OR should be easily accessed during intended use. To be completely disconnect the 
power input, the mains plug or apparatus shall be disconnected from the mains. 

24.

 

Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 

25.

 

Excessive sound pressure from earphones and headphone can cause hearing loss. 

 

 
 
 
 
 
 
 
 
 
 
 
 

- EN 2 - 

FCC NOTICE 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
– Reorient or relocate the receiving antenna. 
– Increase the separation between the equipment and receiver. 
– Connect the equipment into an outlet on a circuit different from that to which the receiver is 

needed. 

– Consult the dealer or an experienced radio/TV technician for help. 

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions : 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 

 
WARNING: 

Changes or modifications to this unit not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment. 

 

CARE AND MAINTENANCE 
Precautions 

y

 

Always turn off the unit after use. 

y

 

Keep the unit away from magnetic objects, water or heat sources. 

y

 

Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never use chemical 
cleaners that could damage the finish of the unit. 

y

 

Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it gently with a 
commercial lens cleaner. 

y

 

Disconnect the unit from any power sources before cleaning. 

y

 

To remove a disc from its storage case, press down on the centre of the case and lift the disc 
out, holding it carefully by the edges. 

y

 

Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. 
Unlike conventional records, compact discs have no grooves to collect dust and microscopic 
debris so gently wiping with a soft cloth should remove most particles. Wipe in a straight line 
from the inside to the outside of the disc. Small dust particles and light stains will have 
absolutely no effect on reproduction quality. 

y

 

Never use chemicals such as record sprays, anti-static sprays, benzene or thinners to clean 
compact discs. These chemicals can irreparably damage the disc’s surface. 

y

 

Discs should be returned to their cases after use. This avoids serious scratches that could 
cause the Laser pickup to skip. 

y

 

Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. 
Long exposure to high temperatures can warp the disc. 

y

 

Do not stick paper or write anything with a ballpoint pen on the label side of the disc.   

 
 
 

- EN 3 - 

Summary of Contents for SRCD286









Reviews: