Sylvania SP244, User Manual

Page: 9 / 23

9
EN
Pairing the speaker with a Bluetooth enabled device
1. Make sure the Bluetooth Speaker is turn off.
2. Keep your Bluetooth Speaker and Bluetooth enabled device within 3 feed of each
other during the pairing process.
3. Slide the Power ON/OFF switch to the ON position. The LED light will flash quickly.
4. Press and hold the button. An audible signal will be emitted and the LED will
blink steadily. The speaker is now in pairing mode.
5. Set your mobile phone or other Bluetooth enabled device to search for Bluetooth devices.
6. When the Bluetooth enabled device finds the speaker, select SP244 from the list
of found devices.
7. If required, enter the password 0000. Select OK or YES to pair the two units.
8. After a successful registration, the LED indicator light will become solid BLUE.
Note: If the speaker has already been connected to the Bluetooth device/phone, the speaker
will reconnect with the Bluetooth device/phone automatically when turned on.
Using your Bluetooth Speaker
Powering ON/OFF
To turn ON, slide the Power ON/OFF switch to the ON position
To turn OFF, slide the Power ON/OFF switch to the OFF position.
Adjusting the volume
Way 1: Rotate the Volume Knob to adjust the volume to the desired level.
Way 2: Press and hold the button to increase the volume and the button to
decrease it to your desired level.
Note: You may also adjust the volume from your mobile phone’s volume control.
Answering and Ending a call
To answer a call, quick press the button.
To end a call, quick press the button.
To make a call
Dial the number and press the send button on your mobile phone.
The call is automatically transferred to the speaker.