When the external BT Device searched the unit, our model number
“SKCR2713-AM” will appear on the display of external BT Device.
Pairing code “0000” or “1234” may need to enter.
Notes:
Note:
Normal operation after paired:
CD:
1. Turn on the BT function of the external BT Device.
2. Power on the unit and enter to BT mode as the instructed earlier. The
indicator will appear on the display and blink.
3. Wait a few seconds until the unit auto paired to the external BT Device.
(The indicator will stop blinking).
4. Plays the music in the paired BT Device as usual.
5. During playback:
1. In standby mode, press the
Button to power on the unit.
2. Press the FUNCTION Button repeatedly until “---” or “no” (No Disc)
appear on the display.
3. Press the Button to open the CD door then place a CD disc on the
tray, with the printed label side up.
If the unit already paired to an external BT Device and you wants to pair
the unit to another new external BT Device in BT paired mode.
Press and hold the PAIR/ Button on the unit or Remote Control
approximate 2 seconds until the indicator
on the display start
And then pair the new BT Device to the unit as the instructed earlier.
Press the PAIR/ Button to pause; press again to resume normal
playback.
Press the
/HR or
/MIN Button to skip tracks.
blinking to unpaired it.
8
BT (BLUETOOTH)
In first time use or re-pairing to a new BT Device, pairing it as below:
1. In standby mode, press the Button to power on the unit.
2. Press the FUNCTION Button repeatedly until the indicator
display and blink.
3. Power on the external BT Device and enter to BT searching mode. Start
pairing as the on screen instructions on the external BT Device. After
paired, the indicator
will stop blinking. (For details pairing
procedures, please refer to the user’s manual of your BT Device.).
4. Plays the music in the paired BT Device as usual.
appear on the
Summary of Contents for SKCR2713-AM
Page 13: ...CARE AND MAINTENANCE 12 ...
