OPERATION INSTRUCTIONS
Listening to a CD
Your unit can play audio CDs, CD-Rs and CD-RWs.
1.
Press the POWER Button to turn on your unit.
2.
Press the FUNCTION Button to CD mode and CD track "--" appears on the
display.
3.
Press the OPEN / CLOSE area to open the CD door.
4.
Place a CD with the label side up into the CD center spindle and close the CD
door.
5.
Press the PLAY / PAUSE Button to start playback.
6.
During playback: Press the PLAY/PAUSE Button to pause playback and press
the button again to resume playback.
7.
During playback: Press one of the SKIP/SEARCH Buttons to go to the next or
previous track on the CD. Press and hold one of the SKIP/SEARCH Buttons to
fast forwarding or fast rewinding for a track on the CD.
8.
Press the STOP Button to stop playback.
NOTES: If a disc is inserted incorrectly, dirty, damaged or not present at all, the
display will show “no”
OPERATING INSTRUC
TIONS
To Set Up a CD Program (program up to 20 tracks):
1.
Press the POWER Button to turn on your unit, and then press the FUNCTION
Button to CD mode. The CD track "--" appears on the display.
2.
Insert a CD into the CD tray. If the CD starts playing, press the STOP Button.
3.
Press the PROG Button. "01" appears on the display.
4.
Press the SKIP/SEARCH Buttons one or more times to select the first track you
want to program.
5.
Press the PROG Button to confirm your selection.
6.
Repeat Step 4 and 5 to add more tracks to your program list.
7.
When you have finished setting, press the PLAY/PAUSE Button to begin
programmed playback.
8.
To cancel a CD program: Press the STOP Button twice or turn off CD program.
NOTES: The repeat operation also applies to CD program playback.
10
