Angle Mark On
Screen Saver On
- - General Setup Page - -
e
g
a
P
p
u
t
e
S
l
a
r
e
n
e
G
o
T
o
G
◄
,
►
,
▲
,
▼
In General Setup Page:
the multi-angle logo will appear on the screen.
On or Off. If set to On,
when multi-angles are available in the playing DVD,
Direction and ENTER/OK
Buttons to set the
Off. If set to
it On or
5. If Last Memory is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set to
On, the unit will start playback from the position where the disc was stopped last time.
menu will appear.
to
In completely stop mode, press the SETUP Button. The setting menu will appear on the screen as below.
Using the Direction Buttons to select and highlight the function you
2.
If Angle Mark is selected, using the Direction and ENTER/OK Buttons to set it
(On Screen Display Language) is selected, using the
3.
4.
If Screen Saver is selected, using the Direction and
Buttons to set
If Speaker Setup is selected, press the
Buttons, the sub-setting
1.
If Downmix is selected, using the Direction and
Buttons
set it
~ If set to Lt/Rt, the rear left or rear right channels will play on both Left and Right Speakers.
In Speak er Setup Page:
TV Shape
Wide
OSD Lang
Last Memory
Off
Eng
1. If TV Shape is selected, using the Direction and ENTER/OK Buttons to set the aspect ratio to
match the playing movie of connected TV.
If OSD Lang
OSD language as desired.
Lt/Rt; Stereo.
~ If set to Stereo, the rear left channel will play on left Left Speaker; the rear right channel will play
on Right Speaker.
SETUP Button to save the settings and exit.
ENTER/OK
ENTER/OK
ENTER/OK
to
SYSTEM SETUP
Off
Text To Speech
need to set or reset.
Press the OK Button on the Remote Control or the ENTER Button on the unit to enter or confirm the
selection. After setting, press the
On, the screen saver will come on when the unit stops or idle for several minutes.
6. If Text To Speech is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set
to On, the unit will sound when each button is pressed.
17
