Connect a USB flash drive or connect to a computer to transfer data.
Note: The USB port is just for data transfer. not for charging.
4. Micro SD
2. USB
3.
RE
S
ET
Use a needle or paper clip to reset unit.
5. DC
Connect DC adapter to power on the device.
1. POWER
Load external micro SD memory cards here.
After connecting power adapter, please press and hold power button for approximately 5 seconds
(until screen turns on).
When it is on, press and hold power button for approximately 3 seconds to access reboot or power off
menu. Short press on power button will turn off/onscreen (but leave the photo frame in on position).
1
2
3
4
5
5
V
D
C
