Auto power-off (Sleep mode)
Under power-on mode, press SLEEP button, the LED will blinking display “90” (blinking
lasts for 5 seconds). Repeatedly press the SLEEP button during the blinking period, then
you can choose among 90
→
80
→
70
→
···· ··
→
10
→
OFF for auto shutdown time. 5 seconds
after setting the time, the setting will be confirmed automatically and auto power-off
function will start up. If you want to power off the unit in the midway, then press POWER
button directly. To check or change the auto power-off time, you need to start up the auto
power-off function, and press SLEEP button, then the remaining power-off time will be
displayed, and you can choose the next grade of auto power-off time by pressing SLEEP
button (for example, “30” has been set, and 2 minutes later, it will display “28” first, again
press SLEEP button will display “15” minutes). If you want to shut down the auto
power-off function without stopping playback, then press the SLEEP button repeatedly
until the power-off time on the LED displays “TIME”, function canceled.
Volume Control
Press VOL-/VOL+ button to adjust to the desired volume. The volume gets 16 levels, and
Level 9 will be the default level.
Time Keeping
Insert batteries and set the clock into Beijing time under standby mode. At any time power
on the unit, the time will be shown as the current Beijing time (without inserting batteries,
the time will display “12:00” every time when you power on the unit).
Bluetooth Operation
Connect the auto devices under Bluetooth mode, after successfully connected, the unit
will start to play music, then press VOL-/VOL+ button to adjust volume, press MIN button
to move next or HR button to move previous, press PLAY/PAUSE button to play or pause
the music.
Bluetooth device name:
SCR1989BT-PL
AUX IN
Convert the power button to AUX IN mode, then the green LED will display “AUX”.
Connect a 3.5mm audio cable to the unit, and it will convert to AUX function automatically
SPECIFICATIONS:
Frequency Range: AM 530 - 1710 kHz
FM 87.5 - 108 MHz
Power Sources:
120V~ 60Hz 4W or
2 x DC1.5V ‘AAA’ size batteries back up for clock (not included)
