background image

 

3

SAFETY INSTRUCTIONS 

THESE IMPORTANT SAFETY INSTRUCTIONS ARE 
INCLUDED, AS APPLICABLE TO THE APPLIANCE, 

CONVEYING TO THE USER THE INFORMATION 

ITEMIZED BELOW 

 
1.

 

Read instructions

 - All the safety and operating instructions should be read before the 

appliance is operated. 

2.

 

Retain instructions

 - The safety and operating instructions should be retained for future 

reference. 

3.

 

Head Warnings

 - All warnings and cautions on the appliance and in the operating instructions 

should be adhered to. 

4.

 

Follow instructions

 - All operating and use instructions should be followed. 

5.

 

Water and Moisture

 - The appliance should not be used near water, e.g. near a bathtub, 

washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool or the like. 

6.

 

Wall or Ceiling Mounting

 - The appliance should not be mounted to a wall or ceiling. 

7.

 

Ventilation

 - The appliance should be situated so that its location or position does not interfere 

with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, 
rug or similar surface that may block the ventilation openings, or placed in a built-in 
installation, such as a bookcase or cabinet, that may impede the flow of air through the 
ventilation openings. 

8.

 

Heat

 - The appliance should be situated away from neat sources such as radiators, heat 

registers, stoves, or other appliances (including amplifiers) that produce heat.. 

9.

 

Power Sources

 - The product should be operated only with the type of power supply indicated 

on the marking label. If you are not sure of the type of power supply to your home, consult 
your product dealer or local power company. For products intended to operate from battery 
power, or other sources, refer to the operation instructions. 

10.

 

Grounding Polarization

 - This product may be equipped with a polarized alternating current 

line plug (a plug having one blade wider than the other). This plug will fit into the power outlet 
only one way this is a safety feature. If you are unable to insert the plug fully into the outlet, 
try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your 
obsolete outlet. Do not defeat the safety purpose of the polarized plug. 

11.

 

Power-Cord Protection

 - Power supply cords should be routed so that they are not likely to 

be walked on or pinched by items placed upon or against them, paying particular attention to 
cords at plugs, convenience receptacles, and the point where they exit from the appliance. 

12.

 

Cleaning

 - Unplug this product from the wall outlet before cleaning. Do not use liquid 

cleaners or aerosol cleaners. Use a damp cloth for cleaning. 

13.

 

Nonuse periods

 - The power cord of the appliance should be unplugged from the outlet when 

left when left unused for a long period of time. 

14.

 

Object and Liquid Entry

 - Care should be taken so that objects do not fall and liquids are not 

spilled into the product case through product openings. 

15.

 

Damage Requiring Service

 - Unplug this product from the wall outlet and take it to qualified 

service personnel under the following conditions. 
a)

 

When the power-supply cord or plug is damaged. 

b)

 

If liquid has been spilled into, or objects have fallen into the product. 

Summary of Contents for SCR1336










Reviews: