9
Using the Audio Input
Require a 3.5mm audio cable (not include).
1. Connect a 3.5mm audio cable to the AUX IN JACK on the rear of the unit
and the audio output on an audio device.
2. Press the POWER / SOURCE BUTTON to turn the unit on.
3. Press the POWER / SOURCE BUTTON to switch to AUX IN mode.
4. Use the native controls on the connected device to play your audio
through the unit.
Playing Audio through Bluetooth
1. After successfully pairing to a device, use the native controls on the
connected Bluetooth device to select a track.
2. To play or pause the selected track, use the native controls on the
connected Bluetooth device, or the
PLAY / CLOCK /PRESET BUTTON.
3. To skip forward or back on the select track, use the native controls on the
connected Bluetooth device or the SKIP / TUNE buttons on the unit.
4. Audio played through the connected Bluetooth device will now be heard
throught the speakers.
8. If your device should become unpaired or you find it is unable to
connect, repeat the above stleps or press the
Press and hold the PLAY/CLOCK/PRESET BUTTON that it can disconnect
the BT connection and go into BT pairing mode.
BLUETOOTH AND LINE IN
Pairing a Bluetooth Device for The First Time
1. Power on and the unit by pressing the POWER/SOURCE BUTTON .
2. Press the POWER/SOURCE BUTTON to switch to Bluetooth mode.
BLUETOOTH MODE INDICATOR will blink slowly.
The BLUETOOTH MODE INDICATOR will blink quickly.
3. Using the native controls on your Bluetooth device, select the
Sylvania SCR1229BT in your Bluetooth settings to pair.
4. If your device requrests a password, enter the default password 0000.
5 .Refter to the use r’s manual for your specific device for instructions on
pairing and connecting Bluetooth devices.
6. When successfully paired and connected, the Pairing indicator will be
solid.
7. After initial pairing, the unit will stay paired unless unpaired manually by
the uswer or erased due to the reset of the device
