background image

Typically, Bluetooth controls are found on the device’s tools 

or settings menu (see your user manual). Turn on Bluetooth 

connectivity and make your device “discoverable”.

4. 

Choose“add a new Bluetooth device”or “setup Bluetooth 

on your device, select it. If your device prompts you for a 

please start pairing procedure again.

5. 

a tone can be heard.

NOTE:

The unit will automatically reconnect the last paired device when 

Bluetooth mode is reselected from other mode. If for some reason 

the Bluetooth connection is lost due to external factors or will not 

auto reconnect, you must clear the SYLVANIA from you Bluetooth 

Devices list and start the pairing process again.

During playback:

•  Press PLAY/PAUSE button to suspend momentarily the playing 

track. Press again to resume playing.

•  Press TUNE+ button to skip forward to the next track and TUNE- 

button to skip backward to the previous track.

•  Press MUTE button to turn off the sound. Press again to resume 

the sound.

•  Press /- buttons to adjust the volume level.

•  Press BASS+/- buttons to adjust bass level.

•  Press /- buttons to adjust treble level.

•  Press EQ button to switch between POP/ JAZZ/ CLASSIC /ROCK and 

NORMAL.

Troubleshooting guide

SYMPTOM 

POSSIBLE CAUSE

POSSIBLE SOULTION

No power

Power adapter not 

connected

Connect the adapter

The unit is in Standby 

mode

Press the Standby 

button on the unit 

or remote control to 

power on the unit.

No sound

Volume in minimum 

position

Raise volume level 

by pressing the VOL 

(Button

The connected device 

is not in playback 

mode

Play the music/movie 

in the connected 

device

Sound output of the 

device is weak

Raise volume level of 

the connected device

Remote not 

working

The batteries in the 

remote control are 

exhausted

Replace with new 

battery

AUX IN / LINE IN 

not working

Wrong mode is 

selected

Press source button 

until indicator turns 

Green (AUX 1 ) / 

Orange (AUX 2)

No response from 

Bluetooth source

Wrong mode is 

selected

Press Source button until 

indicator turns Blue

The unit is connected 

with another 

Bluetooth device

Disconnect the 

connection and retry.

The connected device 

is deactivated

Activate the 

connected device and 

start the playback

Check the followings before requesting service.

GB-16

GB-17

After your device and the “SYLVANIA”have connected to each 

other, 

device”on your device. It will start to search. Once “SYLVANIA”

shows 

code, please enter 0000. If the pairing attempt fails or times 

out, 

Summary of Contents for SB323











Reviews: