Sylvania iMode SIP3045, Owner'S Manual, Page: 11 / 12

Symptom
iPod Player
Unit does not respond
(no power)
iPod does not dock properly
iPod does not respond to the
unit
iPod did not charge up
Possible Cause
AC plug had not inserted
to wall outlet firmly.
Incorrect iPod adaptor is
used.
iPod did not install properly.
iPod is not installed
properly.
iPod is locked.
The iPod may not support
by the unit.
iPod is not installed
properly.
iPod is locked.
iPod battery malfunction.
Solution
Re-plug the AC plug to wall outlet
firmly.
Make sure the adaptor is proper fit
for your iPod.
Remove the iPod from the docking
and check the connections between
the docking and iPod.Then insert
the iPod to the docking again.
Remove the iPod from the docking
and check the connections between
the docking and iPod.Then insert
the iPod to the docking again.
Please make sure your iPod is
working properly before docking into
the unit. Please refer to the iPod
manual for details.
Connect your iPod to the unit via
AUX IN jack on the rear of unit.
Remove the iPod from the
docking and check the connections
between the docking and iPod.Then
insert the iPod to the docking again.
Please make sure your iPod is
working properly before docking into
the unit.Please refer to your iPod
manual for details.
TROUBLE SHOOTING GUIDE
Power Source: DC Battery 4 x 1.5V AA size
Power Source of Remote Control:
DC 3V, 1 x “CR2025” size
battery (Included)
Power Consumption: 14 Watt
Audio Output Power: 2 Watt/Channel
Accessories:
1 x Instruction Manual
5 x iPod docking adaptors
1 x Remote Control (1 x CR 2025 button cell included)
Specifications are subject to change without notice.
General Specification:
11