Sylvania Cameron SRM525-47BDC Instruction Manual Download Page 7

7

CLEANING

To clean unit first turn off controls on unit and unplug the unit from power source. To 
clean glass display panel; remove dust with clean dry cloth or to remove finger prints 
and other marks clean glass with clean damp cloth. Do not use abrasive cleaners or 
spray liquids on glass display panel surface. Metal and metal painted parts should 
be cleaned with damp cloth. Do not use abrasive cleaners or spray liquids on these 
surfaces. 

WARRANTY

Every electric fireplace heater is tested before it leaves the factory and it is guaranteed 
for one year. If the unit should fail to operate correctly within one year from the date 
of purchase, call customer service at 1-800-459-4409 (EST). We will, at our discretion 
either repair or replace the unit. It will have to be returned to us freight prepaid and 
we will return the repaired or replaced unit to you freight prepaid. The company’s 
sole obligation is to repair or replace the unit. 

This warranty is void if in the opinion of Quality Craft the unit has been tampered 
with, altered, misused, damaged, abused or used with the wrong power source. Light 
bulbs and remote batteries are not covered by this warranty. The warranty is for 
homeowner use only and does not cover units used in commercial situations.

Imported by  

Quality craft

 

Laval, Quebec, Canada  H7S 2G7 
1-800-459-4409 (EST) 
www.qualitycraft.com

Made in China

Summary of Contents for Cameron SRM525-47BDC








Reviews: