INSTALLATION INSTRUCTIONS
10
Installation in sliding sash windows
1. Cut the foam seal(adhesive type) to the proper length and
attach it to the window frame. See Fig.14.
2. Attach the window slider kit to the window sill. Adjust the
length of the window slider kit according to the length of
window, short
HQ
the adjustable window kit if the length of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window s
LOO
. See Fig.15.
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window
VOLGHUNLW
. Show as in
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the
window sash and outer window
sash. Show as in Fig.17.
Foam seal
Foam seal A
(adhesive type)
Fig.14
Fig.15
Fig.16
Fig.17
Window
panel
26.5 ~ 48
Fig.16.
inner
