- 16 -
EN
•
If the unit displays a black box
on the TV screen, this means that
the unit is set to the TEXT mode.
To clear screen, select [CAP-
TION1], [CAPTION2] or [OFF].
Make sure ...
•
The unit must be turned on.
1
Select “CAPTION”
Press
[SETUP]
.
Use
[
K
/
L
]
to point to
“CAPTION”.
2
Select your desired caption mode
Press
[ENTER]
repeatedly until
your desired caption menu
appears.
([CAPTION1], [CAPTION2],
[TEXT1] or [TEXT2])
3
Exit the caption setting mode
Press
[SETUP]
to exit the menu.
NOTE:
•
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
TO CANCEL THE CLOSED CAPTION
SYSTEM
Repeat steps
1
to
2
and select [OFF] using
[ENTER]
.
Then press
[SETUP]
to return to TV mode.
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.
CAPTION mode:
You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
TEXT mode:
You can watch half screen text informa-
tion if you want.
1-2:
You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is
usually used for a second language if available.
NOTES:
•
Not all programs are broadcast with closed cap-
tions. Your unit is designed to provide error free
closed captions from high quality antenna, cable
and VCR signals. Conversely, poor quality signals
are likely to result in caption errors or no captions
at all. Common signal conditions which may cause
caption errors are listed below:
•
Automobile ignition noise
•
Electric motor brush noise
•
Weak snowy reception on TV screen
•
Multiplex signal reception displaying picture
ghosts or airplane flutter.
•
Playback of poorly recorded or worn VCR tapes.
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
SLEEP TIMER
The Sleep Timer function turns off the unit without
using
[POWER]
after a desired period of time.
NOTE:
•
This function does not work during the record-
ing mode.
1
Call up the Sleep Timer Setting
Press
[SLEEP]
so that “SLEEP 0 MINUTE” appears.
2
Set sleep time
Press
[SLEEP]
repeatedly until
your desired sleep time appears.
Each additional press will increase
the time by 30 minutes up to 120
minutes.
After 5 seconds, the Sleep Timer setting will disap-
pear automatically.
TO CANCEL THE SLEEP TIMER
Press
[SLEEP]
to call up the Sleep Timer Setting.
Press
[SLEEP]
repeatedly until “SLEEP 0 MINUTE”
appears.
TV/VCR
SLEEP 120 MINUTE
