- 3 -
EN
3. Preset for Use
2
2
LANGUAGE SELECT
B
ENGLISH
[ON]
FRANCAIS
ESPAÑOL
Hint
Hint
• Repeat these steps only if there was a
power failure or if the VCR has been
unplugged for more than 30 seconds.
1
1
Turn on the TV and set
it to channel 3.
• If channel 3 is already occupied for broad-
casting, see“RF Output Channel” section.
POWER
STOP
PLAY
3
3
CH 01
AUTO SET UP
F.FWD
To Select a Channel
You can select a channel by directly
pressing the Number buttons on the
remote control.
Notes for using the Number but-
tons:
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
• You must precede single-digit
channel numbers with a zero (For
example: 02, 03, 04 and so on).
To Preset the Channel Again
1)
Press the MENU button
until the main
menu appears.
2)
Select "CHANNEL SET UP"
by pressing the
PLAY or STOP button. Then, press the
F.FWD button.
3)
Select "AUTO SET UP"
by pressing the
PLAY or STOP button. Then, press the
F.FWD button. After scanning, the tuner
stops on the lowest memorized channel.
To Change the On-Screen Language
1)
Press the MENU button
until the main
menu appears.
2)
Select "LANGUAGE SELECT"
by pressing
the PLAY or STOP button. Then, press the
F.FWD button.
3)
Select "ENGLISH" , "FRANCAIS" or
"ESPAÑOL"
by pressing the PLAY or STOP
button. Then, press the C.RESET/EXIT but-
ton.
1
1
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
MENU
2
2
CHANNEL SET UP
AUTO SET UP
B
MANUAL SET UP
STOP
PLAY
3
3
MANUAL SET UP
CHANNEL 30
(CATV)
ADD
4
4
MANUAL SET UP
CHANNEL 30
(CATV)
ADD
STOP
PLAY
F.FWD
F.FWD
STOP
PLAY
F.FWD
1
1
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B
CLOCK SET
LANGUAGE SELECT
MENU
2
2
CLOCK SET
MONTH DAY
YEAR
0 3 / – –
– – – –
HOUR MINUTE
AM/PM
– – : – –
– –
STOP
PLAY
STOP
PLAY
F.FWD
F.FWD
3
3
CLOCK SET
MONTH DAY
YEAR
0 3 / 1 5
– – – –
HOUR MINUTE
AM/PM
– – : – –
– –
STOP
PLAY
F.FWD
4
4
CLOCK SET
MONTH DAY
YEAR
0 3 / 1 5 2 0 0 4
HOUR MINUTE
AM/PM
– – : – –
– –
STOP
PLAY
F.FWD
5
5
CLOCK SET
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
AM/PM
0 5 : – –
– –
STOP
PLAY
F.FWD
6
6
CLOCK SET
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
AM/PM
0 5 : 4 0
– –
STOP
PLAY
F.FWD
7
7
CLOCK SET
MONTH DAY
YEAR
0 3 / 1 5 MON 2 0 0 4
HOUR MINUTE
AM/PM
0 5 : 4 0
P M AM
B
PM
STOP
PLAY
Hint
Hint
• To go back one step, press the REW button
(during the steps [2] to [7].)
• Your clock setting will be lost if there is a
power failure or if the VCR has been
unplugged for more than 30 seconds.
REW
F.FWD
No
No
Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized
channel.
• You can select only the channels memorized
in VCR by using the CHANNEL buttons.
• If "AUTO SET UP" appears on the TV screen
again, check the cable connections. Then,
press the F.FWD button once again.
Hint
Hint
• If you accidentally select Spanish or French
and need English: Press the MENU button
and choose SELEC. IDIOMA, or SELEC-
TION LANGUE. Press the F.FWD button,
and select ENGLISH. Finally, press the
C.RESET/EXIT button.
Select “ADD” or “DELETE”
Select the channel to be
added or deleted.
5
5
To exit the
menu.
C.RESET
EXIT
Select the current month
Select the current day
Select the current year
Select “AM” or “PM”
8
8
To exit the CLOCK SET
screen.
Select the current hour
Select the current minute
Y
Y
es
es
Press the MENU
button to exit
• Refer to “Hint for Cable Box or
Satellite Box” section on page 1.
Do you connect the cable of the cable box or
the satellite box to the VCR’s ANT IN jack?
Yes
No
Clock Set Up
To Add/Delete Channels
Turn on the VCR for the first time
TV Screen
Remote Control
F.FWD
• If the clock is not set, the
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
or
or
or
or
or
or
or
or
or
or
or
or
