SYKIK Rider CBR5.0, User Manual, Page: 3 / 7

Manual file lock:
1- In the video recording mode, press the [Lock
Button]. A lock symbol appears at the top of the
screen, with the LED light. Please delete the locked
files once no longer needed to open space for longer
recording
2- Capture an Image: Press the Camera button to
take a photo
3- Recording: Press the speaker button to turn on /
off the radio
Light Description
1 second slow flash Recording status
Flashes quickly Lock
Long bright Standby
Features Option Preset options
Flame out video
time
Off/1 min / 3 min / 5 min / 10 min 5 min
Recording File 1 min/2 min /3min
1min
Touch-tone Off/On
On
volume 1 ~ 10 5
recording Off/On
On
Clock settings yyyy-mm-dd-hh-mm-ss
Language English/Simplified Chinese/Traditional Chinese
English
Flickerfrequency 50Hz/60Hz
60 Hz
Screensaver Off/1 min/3 min
1 min
Gear sensitivity Off/High/ Medium / Low
Medium
GPS status
Icon
Time zone
GMT/GMT-01:00 〜 GMT-12:00- GMT+13:00
GMT+08:00
WIFI Off/on
On
System reset Yes/no
Fomnatcard Yes/no
Software version
xxxxxxxxx
3. Power supply: positive (red wire) ACC is connected to "lock switch" and
negative (black wire) is connected to battery negative.
4-wire control: one end is connected to the left or right side of the handle of the faucet, and is
attached to the faucet with a Velcro(lt is recommended to put it in a place where it is
not easy to touch the water), and the other end is connected to the host BMW
connector (MIC).
5. Lens: Lock the lens ring and lens mount on the front and rear positions (front: below the
faucet or above the swash plate, rear: rear protruding position). Tighten with tapping
screws. Please note that the FRONT lens is the front lens and the REAR lens is the
rear lens. When installing the lens, please place the lens towards the middle to avoid
direct light from affecting the image quality.