18
ADDITIONAL INSTRUCTIONS
REPLACING THE LASER VISOR BATTERIES
Unscrew the two screws on the cover of the laser
visor and replace the 3 1.5V size AA batteries making
sure you put them in the right way up; close the visor
again fixing the cover on using the screws provided.
WARNING!
For longer duration we recommend using alkaline
batteries.
REPLACING THE BATTERIES ART. 2400/D
Should the headlight beam tester device battery need
replacing proceed as follows:
with a crosshead screwdriver unscrew the two self-
tapping screws fixing the battery support to the back
cover of the optical box.
Remove the support and extract the battery, detach
the connector and replace. Reassemble, repeating
the operations described for disassembly in the
reverse order.
WARNING!
For longer duration we recommend using alkaline
batteries.
REPLACING THE BATTERIES ART. 2400/I
To replace the 12Vcc 2Ah lead battery proceed as
follows:
open the optical box, removing the cover, be careful
not to damage the electrical connections.
The battery is attached behind the test panel, to
remove it unscrew the nut with a socket wrench and
unhook the attachment bracket. Remove the battery
and replace with a new one making sure you put it in
the right way up.
Reassemble and check the movement of the test
panel before putting the cover back on.