The home technology brand for the entire house. More information at
www.sygonix.com
GB
Operating instructions
3-way outlet strip
Intended use
The outlet strip can be used to switch connected consumer loads on or off using the
integrated mains switch.
The outlet strip should be connected to an earthed mains socket; the mains voltage
should be 230 V/AC, 50 Hz.
The total power input of all consumer loads must not exceed 3680 W.
The product may be used only in dry, enclosed rooms.
Always observe the safety instructions included in these operating instructions. Read
the operating manual carefully; keep it in a safe place and / or pass it on to other users
of the outlet strip.
Any use, other than the one described above, may damage the product. Moreover, this
involves hazards such as e.g. short circuit,
fi
re, electric shock, etc. Modifying or rebuild-
ing any part of the product is forbidden!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package Contents
• Outlet strip
• Operating Instructions
Explanation of Symbols, Inscriptions
The lightning symbol indicates a health hazard, e.g. electric shock.
This symbol indicates speci
fi
c risks associated with handling, function and
use.
The “arrow” symbol indicates special tips and operating information.
The product is only intended to be placed and used in dry, enclosed in-
door areas; it must not get damp or wet.
Observe the operating instructions!
Safety Instructions
The warranty will be void in the event of damage caused by failure to
observe these operating instructions! We do not assume liability for any
consequential damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions! The
warranty will be void in such cases!
a) General instructions
• The unauthorised conversion and/or modi
fi
cation of the product is not
permitted for safety and approval reasons (CE). Do not open/disassemble!
Contains no customer-serviceable parts.
Maintenance, adjustment or repair work may only be carried out by an ex-
pert/authorised service centre, which is familiar with the hazards involved
and the relevant regulations.
• The device is designed according to safety class I. It may be connected and
used only at an earthed mains socket.
• The outlet strip is equipped with a child safety device. Only when the prongs
of a power plug are placed in both openings of the socket at the same time
will the mechanism release the opening.
Even so, be especially careful if children are around. Children cannot realise
the danger arising from the incorrect use of electrical devices. There is a risk
of a life-threatening electric shock!
The product is not a toy and must be kept out of the reach of children. Posi-
tion the product so it is out of the reach of children.
• Do not carelessly leave the packaging material lying around since this may
become a dangerous toy for children.
• Handle the product with care, it can be damaged by impacts, blows, or ac-
cidental drops, even from a low height.
b) Installation location
• The product may only be used in dry, enclosed, indoor areas, it must not get
damp or wet! Never place the product in direct vicinity of a bathroom, shower,
bathtub or the like. There is a risk of a life-threatening electric shock!
• The product must not be exposed to extremes of temperature, direct sun-
light or strong vibrations.
• Unwind the mains cable completely during operation. The power cable must
not be pinched or damaged by contact with sharp edges. Do not place any
objects on the cable, and do not allow it to become kinked. Install the cable
where no one can stumble over it and the plug is easily accessible. Do not
install the mains cable under carpets or the like.
• Do not operate the device in environments where there are high levels of
dust,
fl
ammable gases, vapours or solvents. There is a danger of
fi
re and
explosion!
c) Handling and operation
• Never plug in or unplug the plug-in power unit with damp or wet hands.
There is a risk of a life-threatening electric shock!
• Never connect the device to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g. during transport). The
condensation that develops in such cases could damage the device or
cause an electric shock! Allow the product to reach room temperature. Wait
until the condensation has evaporated. This might take several hours. Only
after this should the product be plugged in to the power supply and put into
use.
• Always pull a mains plug on the gripping surface intended for this purpose.
Never unplug the mains plug from a mains socket by pulling the cable!
• Do not overload the outlet strip. Observe the connected load in the chapter
“Technical Data”.
• Do not connect in series! This can lead to an overloading of the outlet strip!
Fire hazard!
Plug the earthed mains plug of the outlet strip directly e.g. into a wall socket.
Do not connect other outlet strips to this outlet strip.
• Do not operate while covered! At higher connected loads, the outlet strip
and the connecting cable become warm, which can lead to overheating and
potentially a
fi
re if covered!
