The home technology brand for the entire house. More information at
www.sygonix.com
42
m) Setting Function “CAMERA ID”
If desired, you can display the camera name. Unique assignment is possible
particularly when using several cameras, e.g. when you enter the assembly site.
Recording and later playback of the camera image permits easier identi
fi
cation.
“OFF”
The camera name display is deactivated.
“ON”
Display of the camera name is activated.
Push the button to change the name of the camera. Two
lines with 26 characters each can be entered.
Ensure that the letter set “CHR1” is always selected! “CHR2”
does not contain characters and no letters are displayed for
selection.
“CLR”: The character just selected is deleted.
Arrow buttons: Select the input point of the camera name to
be changed.
“POS”:
Con
fi
rm this function with the button to freely select
the position of the camera name in the display (move the
button up/down/left/right). Con
fi
rm the position by brie
fl
y
pushing the button brie
fl
y.
n) Setting Function “SYNC”
The pre-setting “INT” (internal) cannot be changed in this camera.
o) Setting Function “LANGUAGE”
The setup menu of the camera can be displayed in various languages. Select
the desired language.
p) Function “CAMERA RESET”
To reset the camera to factory settings, select this menu item and brie
fl
y push
the button.
