1
Operating Instructions
Battery-operated Outdoor LED Star
Item no: 2574832
1 Intended use
The product is a decorative light.
The product is not suitable for domestic lighting.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor
use. Do not submerge in water.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
3x LED Star
■
3x Ground spike
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
Read the operating instructions carefully.
This product is constructed according to protection class III.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from direct sunlight.
5.4 Operation
■
Lights become hot. Risk of fire! Remove from packaging before operating. Fully lay lights
out and install before operating.
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 (Rechargeable) Batteries
■
Correct polarity must be observed while inserting (rechargeable) batteries.
■
The (rechargeable) batteries should be removed from the device if it is not used for a
long period of time to avoid damage through leaking. Leaking or damaged (re-
chargeable) batteries might cause acid burns when in contact with skin, therefore use
suitable protective gloves to handle corrupted (rechargeable) batteries.
■
(Rechargeable) batteries must be kept out of reach of children. Do not leave (re-
chargeable) batteries lying around, as there is risk, that children or pets swallow them.
■
All (rechargeable) batteries should be replaced at the same time. Mixing old and new (re-
chargeable) batteries in the device can lead to (rechargeable) battery leakage and
device damage.
■
(Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
6 Getting started
6.1 Securing in the ground
After selecting a suitable location, secure the product in the ground.
1. Attach the ground spike to the base of the product.
2. Firmly hold the ground spike and insert it into the ground.
3. Check if the product secured. If not, find a more suitable location.
6.2 Installing batteries
Note:
If an insulating strip protrudes from the battery compartment, batteries are installed
already. Pull the strip out to establish the power supply.
Preconditions:
a
Prepare the required number of batteries of the correct type as stated in the section
“Technical data”.
1. Unlock the battery compartment cover and open the battery compartment.
2. Insert the batteries into the battery compartment observing the polarity markings in the
compartment.
3. Close and lock the battery compartment cover.
7 Operating the lights
Push the power button on the battery compartment to activate different operating modes and
to switch the lights off.
Mode indication
Description
TIMER
Continous timer mode
:
Lights will be on for 6 hours and then off for 18 hours. This cycle
continous until you select a different mode.
ON
Continous on mode
:
Lights will be on until manually switched off.
OFF
Off mode:
Lights are off. Use this mode to permanently switch the lights off.
1. Press the power button to switch modes according to the following sequence: TIMER →
ON → OFF.
8 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Clean the product with a dry, fibre-free cloth.
9 Disposal
9.1 Product
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
