3
Operating Instructions
LED Night Light with USB power supply ports
Item no: 2380483
1 Intended use
The product is an LED night light with USB power supply ports.
Use the product:
■
as a night light
■
to power and charge compatible devices via the USB power supply ports
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
The symbol warns of dangerous voltage that can lead to personal injury by elec-
tric shock. Read the information carefully.
This product must only be used in dry, enclosed indoor areas. It must not be-
come damp or wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Electrical safety
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
Connect the product to a mains socket that can be accessed easily.
■
Only connect the product to a mains socket connected to the public supply. Before con-
necting, check whether the voltage stated on the rating plate complies with the voltage of
your electricity supplier.
■
Never connect or disconnect the product if your hands are wet. There is a risk of electric
shock.
■
For safety reasons, disconnect the product from the mains socket during storms.
■
Do not touch the product if there are any signs of damage, as this may cause a fatal
electric shock! Take the following steps:
– Switch off the mains supply to the product (switch off the corresponding circuit breaker
or remove the safety fuse, and then switch off the corresponding RCD protective
switch).
– Remove the product from the mains socket.
– Do not use the product again. Prevent others from using it.
5.5 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
6 Product overview
1
2
3
1
USB power supply ports
2
Light
3
Light control button
7 Establishing the power supply
Connect the product to the mains power supply.
8 Operation
8.1 Controlling the light
Use the light control button to switch the light on/off and adjust the brightness.
1. Tap the light control button to switch the light on.
2. Touch and hold the light control button to adjust the brightness.
3. After use, tap the light control button to switch the light off.
8.2 Powering USB devices
Power and charge compatible devices via the USB power supply port(s).
1. Make sure the device meets the following specifications:
- Voltage: 5 V/DC
- Current consumption: max. 1 A
2. Connect the device to one of the USB ports with a suitable USB cable.
à
Power is supplied to the connected device.
3. After use, disconnect the USB cable.