4
6 Product overview
1
2
3
5
4
6
7
10
8
9
1
Massage head
2
Oscillator
3
Handle
4
Charging socket
5
Switch
ON/OFF
6
Speed indicator
7
Button
+
Increase speed
8
Battery indicator
9
Button
-
Decrease speed
10
Button
>||
Start and stop motor
7 Charging the battery
Charge the battery via the power adaptor.
Important:
– Fully charge the battery before using the product for the first time.
– Do not use the product while charging is in progress.
1. Slide the switch
ON/OFF
to
OFF
to switch the product off.
2. Connect the adaptor plug to the charging socket on the product.
3. Plug the adaptor into suitable mains socket to start charging.
Charging takes about 3 - 4 h.
à
A RED indicator light on the adaptor indicates charging is in progress.
à
A GREEN indicator light indicates the battery is charged.
4. When the battery is charged, disconnect the plug from the charging socket.
8 Attaching massage heads
Before you massage, attach a massage head suitable for the body part you want to massage.
Important:
Consult a professional if you are unsure about which massage heads are suitable for which body
parts.
1. Slide the switch
ON/OFF
to
OFF
to switch the product off.
2. Follow the installation diagram to remove and attach massage heads.
1
2
3
9 Massaging
Turn the product on, select a suitable speed and massage.
P
RECONDITIONS
:
a
The charging cable is disconnected. The product does not operate with the charging cable connected.
a
A massage head is attached.
1. Slide the switch
ON/OFF
to
ON
.
2. On the display, check the battery indicator. A fully charged battery is indicated by
99
. Charge the bat-
tery if it shows
20
or less.
3. Touch the button
>||
to start the motor.
The motor stops after 15 minutes, the speed indicator shows
E2
. To restart:
> Let the motor cool down for 30 minutes.
> Touch the button
>||
to reset the display.
> Start the motor again.
4. Touch the buttons
+
and
–
to adjust the speed (max. 20 settings). The speed indicator shows the set
speed. Hold the buttons to fast adjust the speed.
5. Gently apply the massage head to your body.
WARNING! Risk of injury! Do not apply to sensitive
areas or areas with little muscle tissue.
If you feel unwell, stop use immediately.
If you overload the motor for more than 3 seconds, the motor shuts off. To recover:
> Slide the switch
ON/OFF
to
OFF
.
> Let the motor cool down for 30 minutes.
> Start the motor again.
6. After massaging, touch the button
>||
to stop the motor.
7. Slide the switch
ON/OFF
to
OFF
to switch the product off.
10 Cleaning
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
11 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
12 Technical data
Product
Input ....................................................... 12.6 V/DC, 1 A
Rechargeable battery ............................ Li-ion rechargeable battery, 11.1 V, 2000 mAh
Battery life (approx.) .............................. 3 h
Battery recharging time .......................... 3 - 4 h
Noise level ............................................. 70 dB(A)
Operating temperature ........................... 0 to +40 °C
Operating humidity ................................. 0 - 85 % RH
Storage temperature .............................. 0 to +40 °C
Storage humidity .................................... 0 - 85 % RH
Dimensions (W x H x D) (approx.) ......... 70 x 215 x 260 mm
Weight .................................................... 1280 g
Power adaptor
Input ....................................................... 100 - 240 V/DC, 50/60 Hz, 0.8 A
Output .................................................... 12.6 V/DC, 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2357059_V1_0721_jh_mh_en
