Sygonix 2336872 Operating Instructions Download Page 2

c) Product

•  The product is designed in accordance with protection class I. Only a standard 

grounding mains socket of the public supply grid (a wall socket, for example) may 

be used as a power source.

•  The product is equipped with an enhanced protection against accidental contact. 

An integrated mechanism will release the holes of the receptacle only, if the two 

prongs of a power plug are inserted into the two holes at once.

•  Take special caution when children are around. Children cannot recognize the 

danger arising from the incorrect use of electrical devices. There is a risk of a 

life-threatening electric shock!

d) Handling and Use

•  Never touch the product or connected loads with wet hands. Risk of a life-threat-

ening electric shock! 

•  Never connect the product to the power supply immediately after it has been 

transferred from a cold room into a warm one. Risk of electric shock! Allow the 

product to reach room temperature. Wait until the condensation has evaporated. 

This might take several hours. Only then the product may be plugged into the 

mains socket and put into use.

•  The socket outlet is only de-energized with the mains plug disconnected.
•  Do not connect in series! This can lead to an overload of the product! There is a 

risk of fire!

• 

Do not operate while covered. Risk of fire! 

•  The mains socket into which the product is plugged must be easily accessible.
•  Never pour any liquids above or next to the product. You run the risk of causing a 

fire or a fatal electric shock! First, power down the respective mains socket (e.g. 

via the respective circuit breaker) and then carefully pull the mains plug from the 

mains socket.

 Warning labels

Warning labels are included in the package. Stick the label in your language over or next 

to the language label on the product.

Care and cleaning

•  Disconnect any peripherals and the product from the mains before each cleaning.
•  Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as 

they can cause damage to the housing and malfunctioning.

• 

Clean the product with a dry, fibre-free cloth.

Disposal

  Electronic devices are recyclable waste and must not be disposed of in the house-

hold waste. At the end of its service life, dispose of the product in accordance with 

applicable regulatory guidelines.

 

You thus fulfill your statutory obligations and contribute to the protection of the envi

-

ronment.

Technical data

Input voltage / current ...................  Voltage: 250 V/AC 

1x 16 A (earth-contact power socket) 

2x 2.5 A (Euro sockets)

Switch ........................................... 1 pole, with integrated control light
Protection class ............................ I
Power ........................................... max. 3680 W
Operating/Storage conditions .......  -10 to +50 ºC, 10 – 90 % RH (non-condensing)
Dimensions (W x H x D) ............... 94 x 79 x 70 mm
Weight .......................................... 97 g 

 Operating Instructions

3-Way Socket Splitter with Switch

Item No. 2336872 (white)
Item No. 2336873 (black)

Intended use

The product is a 3-way socket splitter with on/off switch.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-

rooms, must be avoided under all circumstances.

For safety and approval purposes, you must not rebuild and/or modify this product. If you use 

the product for purposes other than those described above, the product may be damaged. In 

addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read 

the instructions carefully and store them in a safe place. Make this product available to third 

parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company 

names and product names are trademarks of their respective owners. All rights reserved.

Delivery content

•  Product

•  Operating instructions

•  Warning labels

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or 

scan the QR code shown. Follow the instructions on the website.

Explanation of symbols

  The symbol with the lightning in the triangle is used if there is a risk to your health, 

e.g. due to an electric shock.

  The symbol with the exclamation mark in the triangle is used to indicate important 

information in these operating instructions. Always read this information carefully.

  The product must only be installed and used in dry, indoor locations. It must not 

become damp or wet, as this may cause a fatal electric shock!

Safety instructions

Read the operating instructions carefully and especially observe the safety 

information. If you do not follow the safety instructions and information on 

proper handling in this manual, we assume no liability for any resulting per-

sonal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

a) General information

•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. This may become dan-

gerous playing material for children.

•  Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high 

humidity, moisture, flammable gases, steam and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and 

protect it from any accidental use. Safe operation can no longer be guaranteed 

if the product:

 - is visibly damaged,
 - the product does not work at all or works poorly (leaking smoke or a smell of 

burning, audible cracking noises, discolouration to the product or the adjacent 

surfaces)

 - has been stored for extended periods in poor ambient conditions or
 - has been subjected to any serious transport-related stresses.

•  Consult an expert when in doubt about the operation, safety or connection of the 

appliance.

• 

Maintenance, modifications and repairs must only be completed by a technician 

or an authorised repair centre.

•  If you have questions which remain unanswered by these operating instructions, 

contact our technical support service or other technical personnel.

b) Connected devices

•  Also observe the safety and operating instructions of any other devices which are 

connected to the product.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-

cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication 

represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2336872_2336873_v2_0721_02_dh_mh_en

Reviews: