Operation
Important
• Always switch the power off when inserting or removing watches.
• Do not shake the winder when it is in operation.
• Switch the power off and disconnect the power adapter when the winder is not in use.
1. Connect the product to the power supply using the included power adaptor.
2. Open the front cover.
3. Remove the holder from the winder.
Use one hand to support the winder and the index finger and thumb of the other hand to pull the holder
out.
4. Place the watch around the holder.
- Compress the spring on the back of the holder.
- Place the watch around the holder.
- Let go of the spring.
Use the included insert if the holder is not large enough to fit the watch.
5.
Insert the holder into the winder. It should “click” into place.
6.
Select a TPD (turns per day) setting. Refer to section “TPD (turns per day) settings”.
- Item No. 2301560: Touch the
TPD
button repeatedly to toggle through settings. The indicator light will
show the active setting.
-
Item No. 2301561: Slide the TPD switch marked “
A B C D
” to choose a setting.
7. Select a turning movement.
OFF
→ (clockwise) → (counterclockwise) →
(bi-directional)
- Item No. 2301560: Touch the
button repeatedly to toggle through settings. The indicator light will
show the active setting.
- Item No. 2301561: Slide the switch to choose a setting.
TPD (turns per day) settings
• A: 650, rotate 50 turns (7 minutes), pause 104 minutes, and then repeat.
• B: 900, rotate 50 turns (7 minutes), pause 73 minutes, and then repeat.
• C: 1200, rotate 50 turns (7 minutes), pause 53 minutes, and then repeat.
• D: 1500, rotate 50 turns (7 minutes), pause 41 minutes, and then repeat.
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Operating Instructions
Watch Winder
Item No. 2301560 (One Watch Winder)
Item No. 2301561 (Two Watch Winder)
Intended use
The product is a watch winder for automatic me-
chanical watches.
It is intended for indoor use only. Do not use it out-
doors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not re-
build and/or modify this product. If you use the prod-
uct for purposes other than those described above,
the product may be damaged. In addition, improper
use can result in short circuits, fires, electric shocks
or other hazards. Read the instructions carefully and
store them in a safe place. Make this product avail-
able to third parties only together with its operating
instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery content
• Watch winder
• Power adaptor
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the
triangle is used if there is a risk to your
health, e.g. due to an electric shock.
The symbol with the exclamation mark in
the triangle is used to indicate important
information in these operating instructions.
Always read this information carefully.
The arrow symbol indicates special in-
formation and advice on operation.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme tempera-
tures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts, im-
pacts or a fall even from a low height can dam-
age the product.
• Consult an expert when in doubt about the op-
eration, safety or connection of the appliance.
•
Maintenance, modifications, and repairs must
only be completed by a technician or an author-
ised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our techni-
cal support service or other technical personnel.
b) Power adaptor
• The mains outlet must be located near to the de-
vice and be easily accessible.
• As power supply, only use the supplied mains
adaptor.
• Only connect the power adaptor to a normal
mains socket connected to the public supply.
Before plugging in the power adaptor, check
whether the voltage stated on the power adap-
tor complies with the voltage of your electricity
supplier.
• Never connect or disconnect power adaptors if
your hands are wet.
• Never unplug the power adaptor from the mains
socket by pulling on the cable; always use the
grips on the plug.
• When setting up the product, make sure that
the cable is not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip
over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adap-
tor from the mains socket during storms.
Technical data
a) General
Input voltage/current ............................. 4 V/DC, 0.55 A
Watch holder(s) .................................... Item No. 2301560: 1 holder
Item No. 2301561: 2 holders
Rotation settings ................................... 3 (clockwise, counterclockwise, bi-directional)
Independent watch control ................... Item No. 2301560: not applicable
Item No. 2301561: yes
Operating/Storage conditions ............... +5 to +40 ºC, 30 – 85 % RH (non-condensing)
Dimensions (W x H x D) ....................... Item No. 2301560: 119 x 157 x 123 mm
Item No. 2301561: 250 x 130 x 192 mm
Weight .................................................. Item No. 2301560: 391 g
Item No. 2301561: 797 g
b) Power adaptor
Input...................................................... 100 - 240 V/AC, 50/60 Hz, 0.2 A
Output ................................................... 4 V/DC, 0.55 A
Cable length ......................................... 147 cm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2301560_2301561_v1_1120_02_dh_m_en
