Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, otherwise it may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Refer to the safety information and operating instructions for other devices (such
as remote-controlled sockets, timers etc.) when connecting the product to such
devices.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
b) Persons and product
• Before connecting the product to the mains, check that your local A/C mains
voltage matches the specifications on the nameplate. Never try to operate the
light using another type of voltage, as this may destroy the product.
•
Never cover the product. The surface may get hot during use; covering the
product not only constitutes a fire hazard but may also cause it to overheat, which
could damage the components.
•
Keep the product away from flammable materials and objects.
• Do not hang or secure any objects (e.g. decorations) to the product.
• Do not mount and use the product in rooms or in adverse environmental
conditions that contain or may contain flammable gases, vapours or dust! There
is a risk of explosion.
• The LED strip is constructed according to protection class III.
• The LED strip is not designed for use with an alternating current (transformers).
This may destroy the product!
• Do not place mechanical loads onto the components of the LED strip.
•
Never pour any liquids over electrical products or put objects filled with liquid right
next to the product. If liquid or an object does enter the interior of the product,
power down the respective socket (e.g. switch off circuit breaker) and then unplug
the mains plug. Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. The power
adapter may also generate a fatal electric shock! Allow the product to reach room
temperature before connecting it to an appliance. This may take several hours.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! First, switch off the mains voltage to the socket to
which the mains adapter is connected (switch off at the corresponding circuit
breaker, remove the safety fuse, or switch off at the corresponding RCD protective
switch), and then unplug the power cable from the mains socket. Dispose of the
faulty power adapter in an environmentally friendly manner and discontinue use.
Replace it with a power adapter of the same design.
• The electrical outlet must be located in direct proximity to the product and should
be easily accessible.
• Only use the power adapter that came with the product.
• The power adapter must never be plugged in or disconnected when your hands
are wet.
•
Never unplug the power adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, ensure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay cables so that nobody can trip over or become entangled in them, as
this poses a risk of injury.
Operating Instructions
LED strip, 3 m, warm white, dimmable
Item no. 2250935
Intended use
This product is designed for use as a decorative indoor lamp. The white SMD LEDs can be
switched on and off using the remote control provided. The LED strip is powered by a 12 V/DC
voltage. It must only be operated with the power adapter provided. The LEDs are dimmable.
The LED strip can be shortened and secured to different types of surface using self-adhesive
tape. The product must be mounted in a position that protects it against moisture, dirt and heat.
It is designed to be mounted on a floor, wall or ceiling.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using
the product for purposes other than those described above may damage the components. In
addition, improper use can cause hazards such as short circuits, fire and electric shocks. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• LED strip
• Remote control (with CR2025 battery)
• Control unit
• Power adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
The product must only be installed and used in dry, enclosed indoor locations. This
product must not become damp or wet, as this may result in a fatal electric shock!
This symbol indicates that this product is built according to protection class II. The
product is equipped with reinforced or dual insulation between the mains circuit and
the output voltage.
The device was constructed according to protection class III. Protection class III
includes electrical products with a low voltage power supply (< 50 Volts) using a
safety transformer or batteries/rechargeable batteries/solar power etc. Products in
protection class III have no connection for protective insulation - they must not be
connected to the protective earth.
This symbol indicates that a safety transformer is built into the product according to
the VDE 0551 guidelines.
Independent converter. The converter is designed to operate lights without additional
covers or safety measures.
This symbol reminds you to read the operating instructions included with the
product.