Intended use
This product is a dummy that resembles a functional
surveillance camera and is intended for use as deterrent in
secluded and critical areas (e.g. driveways, entrance areas,
etc.). The product is suitable for outdoor installation.
For safety and approval purposes, you must not rebuild and/
or modify this product. If you use the product for purposes
other than those described above, the product may be
damaged. Read the instructions carefully and keep them.
Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and product
names are trademarks of their respective owners. All rights
reserved.
Up-to-date Operating Instructions:
1. Open www.produktinfo.conrad.com
in a browser or scan the displayed QR
code.
2. Select document type and language
and enter the item number into the
search field. After submitting the query
you can download displayed records.
Delivery content
•
Camera dummy
•
Operating instructions
Safety instructions
Read the operating instructions carefully and
especially observe the safety information. If you do
not follow the safety instructions and information
on proper handling in this manual, we assume no
liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/
guarantee.
•
The device is not a toy. Keep it out of the reach of
children and pets.
•
Do not leave packaging material lying around
carelessly. These may become dangerous playing
material for children.
•
Please handle the product carefully. Jolts, impacts or
a fall even from a low height can damage the product.
•
For installations in industrial facilities, follow the
accident prevention regulations for electrical systems
and equipment of the government safety organization
or the corresponding authority for your country.
•
If you have questions which remain unanswered by
these operating instructions, contact our technical
support service or other technical personnel.
Installation
1.
Choose a suitable location to mount the dummy camera.
2.
Screw the dummy camera firmly to the wall. Depending
on the wall, use suitable screws and wall plugs.
When drilling or tightening screws, make sure not to
damage any cables, wires or pipes located underneath
the surface.
3. Loosen the screws at both joints to swivel/tilt the
camera into the desired position. After that, retighten
both screws.
Maintenance and cleaning
Do not use any aggressive cleaning agents, rubbing
alcohol or other chemical solutions as they can cause
damage to the housing.
•
Do not apply too much force to the housing in order to
avoid scratching.
•
Besides occasional cleaning, the device is maintenance-
free.
•
Use a clean, soft and dry cloth to clean the housing. For
more stubborn dirt, slightly moisten the cloth with a little
lukewarm water.
Disposal
At the end of its service life, dispose of the product
according to the relevant statutory regulations.
Technical data
a) Item no. 1396766
Tilting angle ...........................................60°
Swiveling angle .....................................360°
Protection type ......................................IP65
Material ..................................................Aluminum
Number of LED dummies .....................24 pcs
Dimensions (W × H × D) .........................66 × 127 × 167 mm
Weight....................................................450 g
b) Item no. 1396767
Tilting angle ...........................................60°
Swiveling angle .....................................360°
Protection type ......................................IP65
Material ..................................................Aluminum
Number of LED dummies .....................36 pcs
Dimensions (W × H × D) .........................83 x 170 x 205 mm
Weight....................................................880 g
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems require the prior
written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_1215_02_ETS-Mkd
Operating Instructions
Camera dummy
Item No. 1396766 (V2)
Item No. 1396767 (V3)