SYCLOPE TRACE'O, Manual

Page: 17 / 60

User Menu Page 17/60
Programming manual of SYCLOPE TRACE’O ®
b) Calibration of the flowmeter (Only if programmed)
The calibration of the flowmeter must be done according the “weigh” of the pulse of the counter or of
the sensor who will used to measure le flowrate.
Use the +/- keys to adjust the required value …
Use the “OK” key to select the digit and to validate the value.
The calibration is made w ith LITER/ pulse unity ! The displaying of the parameter
w ill be expressed in m 3 / hour.
4) Setting points
This menu allows to determine the setting point of each parameter.
The measuring parameters are listed according the selected parameters.
The first one corresponds to the main entry (E1).
The second one correspond to the auxiliary entry (E2).
The third one is displayed or not according the activation of the flowrate measurement
channel.
_ >> USER MENU << _
Specialist menu
User code
Calibrations
Setting points
Timers of cycles
Technical alarms
Analog. Outputs
_ >> USER MENU << _
Specialist menu
User code
Calibrations
Setting points
Timers of cycles
Technical alarms
Analog. Outputs
_ >> USER MENU << _
Setting points
Free chlorine
pH
Flow rate
_ >> USER MENU << _
Specialist menu
User code
Calibrations
Setting points
Technical alarms
Analog. Outputs
Printer output
_ >> USER MENU << _
Calibrations
pH
Free chlorine
Flow rate
_ Flometer _
Gain :00000.00 l/puls