TROUBLESHOOTING
F A U L T
C A U S E
S O L U T I O N
Water drips out
when moving unit
Unit was unplugged before
purging was complete.
Purge unit before moving. See “At the End of the Job,” p. 4.
Unit does not
operate
Unit not switched on.
No power to machine.
Switch unit on.
Plug in unit; check power cord connection at wall outlet and at
base of unit.
Blower wheel not
turning
Obstructed blower.
Remove duct ring and grill and remove obstruction. Replace
duct ring and grill.
Unit operating,
but room not dry
Not enough time to dry.
Poor air movement in room.
Excessive moist air infiltration.
Allow more time for drying.
Increase air movement with air movers.
Seal off area to reduce infiltration.
Unit collects too
little water
Room air is dry.
Room temperature is too low.
HAF filter is full.
Heat exchange block and/or
coils are clogged.
Confirm humidity level with hygrometer.
Increase room temperature.
Check filter. Clean or replace as necessary.
Check heat exchange block and coils. Clean as necessary.
If the problem you are experiencing is not listed here, contact your Aramsco location for further assistance.
SPECIFICATIONS
Model
Syclone LGR Model LGR145
#53480 Syclone
Weight
115 lbs. | 50 kg
Dimensions
(H × D × W)
33.5 × 20 × 20 in. | 85 × 51 × 51 cm
Power
9.8 amps, 115V
Water removal AHAM
(80°F/60% RH)
145 pts. | 68.6 L / day
Water removal max.
235 pts. | 111 L / day
Water removal low grain
(80°F/20% RH)
17 pts. | 8 L / day
Process air (max.)
280 CFM* | 476 CMH*
Noise level (avg.)
65 dB
Air filter
3M™ HAF filter
Part no. 55315 (24 pack)
Drain hose
40 ft. | 12.2 m
Power cord
25 ft. | 7.6 m
Construction
Rotomolded shell
Safety
Certified to CSA Std C22.2 No. 92
Specifications are subject to change without notice. Some values
may be approximate.
*Fan speed varies automatically for optimized performance.
For proper disposal, this unit should be taken to a
recycler licensed to process refrigeration equipment.
07-01922C F532-120V 2015-03 Warranty 07-01939
20
Aramsco
