Syclone LGR145 Owner'S Manual Download Page 1

Owner’s Manual 

Syclone LGR Dehumidifier 

Model LGR145 (120V) #53480 

Aramsco

 A Safeguard Industrial Company 

1480 Grandview Ave., Paulsboro, NJ 08066 | 800-767-6933 

The Syclone LGR145 dehumidifier reduces humidity in enclosed environments by removing 
water vapor from the air. The Syclone LGR is rugged, durable and highly portable, making it 
ideal for water damage restoration, structural drying, construction, and other applications 
requiring temporary, high-performance dehumidification.  

R E A D   A N D   S A V E   T H E S E   I N S T R U C T I O N S

 

WARNING! Do not alter or modify your Syclone LGR 
in any way. Use only replacement parts authorized 
by Aramsco. Modifications or use of unapproved 
parts could create a hazard and will void your 
warranty. Contact your Aramsco location for 
assistance. 
WARNING! Electric shock hazard, rotating fan, hot 
surface hazards. Unplug unit before opening cover 
for cleaning or servicing. 

WARNING! Unit must be grounded. 

  Keep motor and wiring dry. Keep out of standing 

water and do not install in area likely to be subject to 
water intrusion. Do not expose to rain, water or 
snow. 

  Insert three-prong plug on power cord into a 

matching electrically grounded outlet. Do not use 
adapter. Never cut off third prong.  

  Do not use an extension cord.  

  To reduce the risk of fire or electric shock, do not 

use this unit with any solid-state speed control 
device. 

FIRE HAZARD 

  Keep away from open flames and heat sources. 

  Do not use or store where vapors from gasoline, 

solvents, thinners or other flammable materials may 
be present. 

WARNING! Unplug unit before cleaning or servicing

  Turn off unit and unplug before lifting or moving. 

  Handle the unit carefully. Always operate the unit on 

a stable, level surface. Do not drop, throw, or place 
where it could fall. Rough treatment can damage the 

unit, and may create a hazardous condition or void 
the warranty. 

  Inspect the power cord before use. If cord is 

damaged, do not use. Always grasp the plug (not 
the cord) to unplug. 

  The unit must be operated on a 115V/60 Hz circuit 

protected by a Ground Fault Circuit Interrupter 
(GFCI) device.  

  Do not attempt to repair the unit. For Authorized 

Service Centers, contact your Aramsco location.  

CONTENTS GUIDE 

OPERATIONS 

Parts identification

 .......................................... 2 

Positioning a dehumidifier

 ............................. 2 

Operating your dehumidifier

 .......................... 2 

Control Panel Guide

 ........................................ 3 

At the end of the job

 ........................................ 4

 

Setting humidistat mode

 ................................. 4 

 
MAINTENANCE 
Maintenance schedule

 .................................... 7

 

Cleaning the coils and block

 .......................... 7

 

Error messages

 ............................................... 8 

Cleaning the pump valve

 .............................. 11

 

Inspecting the Control Panel

 ........................ 17 

Troubleshooting

 ............................................ 20 

BEFORE YOU BEGIN 

Warranty  

Keep your invoice or proof of purchase on file in case 
your unit should require warranty repair. If you determine 
service is required, have your equipment model, serial 
number and original proof of purchase available and call 
your Aramsco location for assistance with obtaining a 
return material authorization (RMA). 

 

INTRODUCTION 

LGR (low-grain refrigerant) dehumidifiers like the 
Syclone LGR utilize an internal pre-cooling system to 
boost water removal efficiency. LGR units can continue 
to remove moisture in drier environments where 
conventional refrigerants cannot. 

 

 

 WARNING 

 

07-01922C F532-120V 2015-03 Warranty 07-01939 

Aramsco 

Summary of Contents for LGR145
































































Reviews: