45
Alerting „Test call“
Run. No.
Setting and testing the alerting „Test call“
Page
4
9.2.1 Assigning alert call number(s)
45
5
9.2.2 Listening test call announcement
46
6
9.2.3 Switching the test call function on and setting the time
46
7
9.2.4 Testing the test call
47
9.2.1 Assigning alert call number(s)
Assign the desired alert call-number(s) to the call trigger „test call“.
ATTENTION
In the following procedure it is not the call number itself
which is allocated but instead the memory location in which
the number is stored (see table on the page 18).
Example: If you want to assign the numbers 4 and 5, so
enter 45. If the test call is triggered, the numbers are dialled
chosen in order of entries.
Open
Menu
> press
to select „Menu release PIN“
>
Ok
.
Enter 4-digit PIN >
Ok >
„Alerts“ >
Ok
.
Press
to select „Call trigger“ >
Ok
.
Press
to select „Test call“ >
Ok
.
Enter assignment (memory location(s) of the call num-
ber(s)), (for example, 45 for the call numbers of the
locations 4 and 5) >
Ok
.
Select further settings or press and hold
Back
to return to
standby mode.
Editing/Deleting
While entering the memory location(s), you can delete the
last location with
and enter new locations via the digit-
keys. You can delete all locations with
Delete.
