General
P/N 224 1ME1 Infrared Receiver with 4 switch outputs
Channel 1 – 3 = Closing, Channel 4 = Changeover
Power Supply through USB plug
IR-4Switch uses the same IR signals as IR-EASY.
There are 4 IR device addresses possible which allows to operate
up to 4 IR-4Switch devices in the same room.
You can also use the Signals of the
IRS IR Power Socket (ext.
Contact)
.
Simple programming of the IR address through remote control.
Technical Specs
Power Supply:
5 V DC (USB)
Switch Outputs: 4 (3 x Closing, 1 x Changeover)
max. 30V, 500 mA for each channel
Dimensions:
51x82x14mm
Cable:
approx. 50 cm
Weight:
70g
User Manual
Art.Nr. 224 1ME1
•IR
-
4switch
English
1: IR Receiver
2: Status LED IR Address
3: Status LED IR-Receiver
4: Status LED Channel1 .. 4
5: 3,5 mm sockets
Setting the IR Device Address
If you are planning to use more than one IR-4Switch in the same
room, each one must be set to a different IR address.
The setting can be done by sending an IR signal from the remote
control to the IR-4Switch within the first 10 sec. after the IR-
EASY is plugged in (blue LED (2) is on).
1. First select the address on the
remote control regarding this
table :
2. Plug in the IR-4Switch to the
power supply, the blue LED is
now on for 10s.
3. Now send an IR-4Switch signal
to set the IR address. (IRS Signals do not work at this point)
IR-4Switch will now work with the signals of that IR device
address.
After 10s or when a valid IR signal was received the blue LED
flashes x times (x = address). If there is no signal received, IR-
4Switch keeps the last stored address.
Please make sure that only one IR-4Switch is powered when
setting the device address!
Safety and Mounting Instructions
-
IR-4Switch may only be used in dry rooms.
-
Cleaning only when not connected to power supply and only
with a clammy cloth.
-
If there is a LED / LCD TV in the same room make sure to test
the functionality of IR-Easy when the TV is running. These
devices can transmit infrared light which can interfere with
the reception of IR-4Switch.
-
Position IR-4Switch so that it is not directly under synthetic
light or in sunlight, this can lower the reception of the IR
receiver.
Scope of Delivery
IR-4Switch, USB Power Supply, User Manual
Sybility GmbH, Kreuzweg 15, 91781 Weißenburg, T: 09141-9131689, F: 09141-9132855
Stand 01/2019
How it work
- IR-4Switch uses the same IR signals as IR-EASY.
- As soon as IR-EASY receives an IR signal the green LED starts
flashing. It also flashes if any IR signal is received.
- If a valid signal is received (correct IR-address) the blue LED of
the switch output lights up additionally.
- If only the green LED flashes please make sure the IR-EASY is
set to the correct address.
green
: IR-Receiving
blue
: Prog. Time 10s (2) and
valid IR Signal
Use with IR-EASY Signals
-
Please see the used buttons of the remote control in the
manual of the remote.
-
For each IR address you can use the signals linked to the
buttons 1 .. 4 for the corresponding switch output.
-
The switch output remains switched as long as the IR signal
is received.
Use with IRS Signals
-
Please see the used buttons of the remote control in the
manual of the remote.
-
IRS Signals can only be used in IR-Adr. 1.
-
The switch output remains switched as long as the IR signal
is received.
-
The 4 signals of the external contact of the IRS power
socket will also switch the corrsponding switch output in
the IR-4Switch, z.B. IRS Ext. 1 = IR-4Switch Output 1.
Pinning Switch Output Closing Contact (Channel 1 .. 3):
Closing Contact: COM - NO
1
2
3
4
Pinning Switch Output Changeover Contact (Channel 4):
Opening Contact: COM – NC
Closing Contact: COM - NO
COM
NO
COM
NO
NC
5
Remote Control
white / black
Address
IR-EASY
TV / TV
Adr.1
PVR / DTT
Adr. 2
DVD / SAT
Adr. 3
EXTRA / AUX
Adr. 4
